cmd/bpa-operator/e2etest/bpa_bmh_verifier.sh

   1 #!/usr/bin/env bash
   2 set -eu -o pipefail
   3
   4 CLUSTER_NAME=test-bmh-cluster
   5
   6 kubectl create -f e2etest/test_bmh_provisioning_cr.yaml
   7 sleep 5
   8
   9 #Check Status of kud job pod
  10 status="Running"
  11
  12 while [[ $status == "Running" ]]
  13 do
  14     echo "KUD install job still running"
  15     sleep 2m
  16     stats=$(kubectl get pods |grep -i kud-${CLUSTER_NAME})
  17     status=$(echo $stats | cut -d " " -f 3)
  18 done
  19
  20 #Print logs of Job Pod
  21 jobPod=$(kubectl get pods|grep kud-${CLUSTER_NAME})
  22 podName=$(echo $jobPod | cut -d " " -f 1)
  23 printf "\nNow Printing Job pod logs\n"
  24 kubectl logs $podName
  25
  26 if [[ $status == "Completed" ]];
  27 then
  28    printf "KUD Install Job completed\n"
  29    printf "Checking cluster status\n"
  30
  31    source ../../env/lib/common.sh
  32    CLUSTER_KUBECONFIG=/opt/kud/multi-cluster/${CLUSTER_NAME}/artifacts/admin.conf
  33    APISERVER=$(KUBECONFIG=${CLUSTER_KUBECONFIG} kubectl config view --minify -o jsonpath='{.clusters[0].cluster.server}')
  34    TOKEN=$(KUBECONFIG=${CLUSTER_KUBECONFIG} kubectl get secret $(KUBECONFIG=${CLUSTER_KUBECONFIG} kubectl get serviceaccount default -o jsonpath='{.secrets[0].name}') -o jsonpath='{.data.token}' | base64 --decode)
  35    if ! call_api $APISERVER/api --header "Authorization: Bearer $TOKEN" --insecure;
  36    then
  37        printf "\nKubernetes Cluster Install did not complete successfully\n"
  38        exit 1
  39    else
  40        printf "\nKubernetes Cluster Install was successful\n"
  41    fi
  42
  43 else
  44     printf "KUD Install Job failed\n"
  45     exit 1
  46 fi
  47
  48 function emcoctl_apply {
  49     # Workaround known issue with emcoctl resource instantation by retrying
  50     # until a 2xx is received.
  51     try=0
  52     until [[ $(/opt/kud/multi-cluster/${CLUSTER_NAME}/artifacts/emcoctl.sh apply -f $@ -v values.yaml  |
  53                    awk '/Response Code:/ {code=$3} END{print code}') =~ 2.. ]]; do
  54         if [[ $try -lt 10 ]]; then
  55             echo "Waiting for KUD addons to terminate"
  56             sleep 1s
  57         else
  58             return 1
  59         fi
  60         try=$((try + 1))
  61     done
  62     return 0
  63 }
  64
  65 function emcoctl_delete {
  66     # Workaround known issue with emcoctl resource deletion by retrying
  67     # until a 404 is received.
  68     until [[ $(/opt/kud/multi-cluster/${CLUSTER_NAME}/artifacts/emcoctl.sh delete -f $@ -v values.yaml |
  69                    awk '/Response Code:/ {code=$3} END{print code}') =~ 404 ]]; do
  70         echo "Waiting for KUD addons to terminate"
  71         sleep 1s
  72     done
  73 }
  74
  75 function wait_for_addons_ready {
  76     #Wait for addons to be ready
  77     # The deployment intent group status reports instantiated before all
  78     # Pods are ready, so wait for the instance label (.spec.version) of
  79     # the deployment intent group instead.
  80     status="Pending"
  81     for try in {0..19}; do
  82         printf "Waiting for KUD addons to be ready\n"
  83         sleep 30s
  84         if KUBECONFIG=${CLUSTER_KUBECONFIG} kubectl wait pod -l app.kubernetes.io/instance=r1 --for=condition=Ready --all-namespaces --timeout=0s 2>/dev/null >/dev/null; then
  85             status="Ready"
  86             break
  87         fi
  88     done
  89     [[ $status == "Ready" ]]
  90 }
  91
  92 #Install addons
  93 printf "Installing KUD addons\n"
  94 pushd /opt/kud/multi-cluster/${CLUSTER_NAME}/artifacts/addons
  95 emcoctl_apply 00-controllers.yaml
  96 emcoctl_apply 01-cluster.yaml
  97 emcoctl_apply 02-project.yaml
  98 emcoctl_apply 03-addons-app.yaml
  99 popd
 100 wait_for_addons_ready
 101
 102 #Workaround for sriov+kubevirt issue on single-node clusters
 103 # The issue is kubevirt creates a PodDisruptionBudget that prevents
 104 # sriov from succesfully draining the node.  The workaround is to
 105 # temporarily scale down the kubevirt operator while the drain occurs.
 106 KUBEVIRT_OP_REPLICAS=$(KUBECONFIG=${CLUSTER_KUBECONFIG} kubectl get deployments/r1-kubevirt-operator -o jsonpath='{.spec.replicas}')
 107 KUBECONFIG=${CLUSTER_KUBECONFIG} kubectl scale deployments/r1-kubevirt-operator --replicas=0
 108
 109 #Install addon resources
 110 printf "Installing KUD addon resources\n"
 111 pushd /opt/kud/multi-cluster/${CLUSTER_NAME}/artifacts/addons
 112 emcoctl_apply 04-addon-resources-app.yaml
 113 popd
 114 wait_for_addons_ready
 115
 116 #Workaround for sriov+kubevirt issue on single-node clusters
 117 # Scale the kubevirt operator back up and wait things to be ready
 118 # again.
 119 KUBECONFIG=${CLUSTER_KUBECONFIG} kubectl wait nodes --for=condition=Ready --all
 120 KUBECONFIG=${CLUSTER_KUBECONFIG} kubectl scale deployments/r1-kubevirt-operator --replicas=${KUBEVIRT_OP_REPLICAS}
 121 wait_for_addons_ready
 122
 123 #Test addons
 124 printf "Testing KUD addons\n"
 125 pushd /opt/kud/multi-cluster/addons/tests
 126 failed_kud_tests=""
 127 container_runtime=$(KUBECONFIG=${CLUSTER_KUBECONFIG} kubectl get nodes -o jsonpath='{.items[].status.nodeInfo.containerRuntimeVersion}')
 128 if [[ "${container_runtime}" == "containerd://1.2.13" ]]; then
 129     #With containerd 1.2.13, the qat test container image fails to unpack.
 130     kud_tests="topology-manager-sriov kubevirt multus ovn4nfv nfd sriov-network cmk"
 131 else
 132     kud_tests="topology-manager-sriov kubevirt multus ovn4nfv nfd sriov-network qat cmk"
 133 fi
 134 for test in ${kud_tests}; do
 135     KUBECONFIG=${CLUSTER_KUBECONFIG} bash ${test}.sh || failed_kud_tests="${failed_kud_tests} ${test}"
 136 done
 137 KUBECONFIG=${CLUSTER_KUBECONFIG} DEMO_FOLDER=${PWD} PATH=/opt/kud/multi-cluster/${CLUSTER_NAME}/artifacts:${PATH} bash plugin_fw_v2.sh --external || failed_kud_tests="${failed_kud_tests} plugin_fw_v2"
 138 if [[ ! -z "$failed_kud_tests" ]]; then
 139     printf "Test cases failed:${failed_kud_tests}\n"
 140     exit 1
 141 fi
 142 popd
 143 printf "All test cases passed\n"
 144
 145 #Tear down setup
 146 printf "\n\nBeginning BMH E2E Test Teardown\n\n"
 147 # Workaround known issue with emcoctl resource deletion by retrying
 148 # until a 404 is received.
 149 pushd /opt/kud/multi-cluster/${CLUSTER_NAME}/artifacts/addons
 150 emcoctl_delete 04-addon-resources-app.yaml
 151 emcoctl_delete 03-addons-app.yaml
 152 emcoctl_delete 02-project.yaml
 153 emcoctl_delete 01-cluster.yaml
 154 emcoctl_delete 00-controllers.yaml
 155 popd
 156 kubectl delete -f e2etest/test_bmh_provisioning_cr.yaml
 157 kubectl delete job kud-${CLUSTER_NAME}
 158 kubectl delete --ignore-not-found=true configmap ${CLUSTER_NAME}-configmap
 159 rm -rf /opt/kud/multi-cluster/${CLUSTER_NAME}
 160 rm -rf /opt/kud/multi-cluster/addons
 161 make delete