1 ##############################################################################
2 # Copyright (c) 2018 AT&T Intellectual Property. All rights reserved. #
4 # Licensed under the Apache License, Version 2.0 (the "License"); you may #
5 # not use this file except in compliance with the License. #
7 # You may obtain a copy of the License at #
8 # http://www.apache.org/licenses/LICENSE-2.0 #
10 # Unless required by applicable law or agreed to in writing, software #
11 # distributed under the License is distributed on an "AS IS" BASIS, WITHOUT #
12 # WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. #
13 # See the License for the specific language governing permissions and #
14 # limitations under the License. #
15 ##############################################################################
17 # Add proxy settings if required for your environment
18 # export http_proxy=http://your.proxy.com:8080/
19 # export https_proxy=http://your.proxy.com:8080/
22 # host name for server
25 # server oem - Dell or HPE (case sensitive)
28 # out of band interface information for server (idrac/ilo/etc)
29 SRV_OOB_IP=192.168.41.40
33 # mac address of server to be used during the build - not required for Dell servers
36 # name of network interface used during build when ipxe.efi is booted and when os is booted
37 # ipxe numbers ports from 0-n in pci bus order.
38 # the netx value will depend on how many nics are in the server
39 # and which pci device number is assigned to the slot
42 # the build interface is the nic used by the Ubuntu installed to load the OS
45 # the boot device is the device name on which the OS will be loaded
49 # ipxe script to use - based on the os version and kernel to install
50 # valid options are script-hwe-16.04.4-amd64.ipxe or script-16.04.4-amd64.ipxe
51 SRV_BLD_SCRIPT=script-hwe-16.04.5-amd64.ipxe
53 # template xml file to set bios and raid configuration settings
54 SRV_BIOS_TEMPLATE=dell_r740_g14_uefi_base.xml.template
55 SRV_BOOT_TEMPLATE=dell_r740_g14_uefi_httpboot.xml.template
56 SRV_HTTP_BOOT_DEV=NIC.Slot.2-1-1
58 # tempalte to run to configure OS after first boot
59 # current options are: firstboot.sh.template, firstboot-genesis.sh.tempate or firstboot-airship-iab.sh.template
60 SRV_FIRSTBOOT_TEMPLATE=firstboot-genesis.sh.template
62 # VLAN to use during build and for final network configuration
69 # basic network information for dhcp config and final server network settings
72 SRV_STORAGE_IP=172.31.2.40
73 SRV_CALICO_IP=172.29.1.40
74 SRV_NEUTRON_IP=10.0.102.40
75 SRV_PXE_IP=172.30.2.40
76 SRV_SUBNET=192.168.2.0
77 SRV_NETMASK=255.255.255.0
78 SRV_GATEWAY=192.168.2.200
79 SRV_DNS="192.168.2.85 8.8.8.8 8.8.4.4"
80 SRV_DOMAIN=lab.akraino.org
81 SRV_DNSSEARCH=lab.akraino.org
82 SRV_NTP=ntp.ubuntu.org
84 # root password for server being built
87 # network bond information