# Calico Version v3.3.4
# https://docs.projectcalico.org/v3.3/releases#v3.3.4
# This manifest includes the following component versions:
#   calico/node:v3.3.4
#   calico/cni:v3.3.4
#

# This ConfigMap is used to configure a self-hosted Calico installation.
---
kind: ConfigMap
apiVersion: v1
metadata:
  name: calico-config
  namespace: kube-system
data:
  # To enable Typha, set this to "calico-typha" *and*
  # set a non-zero value for Typha replicas
  # below.  We recommend using Typha if you have more than 50 nodes.
  # Above 100 nodes it is essential.
  typha_service_name: "none"
  # Configure the Calico backend to use.
  calico_backend: "bird"

  # Configure the MTU to use
  veth_mtu: "1440"

  # The CNI network configuration to install on each node.  The special
  # values in this config will be automatically populated.
  cni_network_config: |-
    {
      "name": "k8s-pod-network",
      "cniVersion": "0.3.0",
      "plugins": [
        {
          "type": "calico",
          "log_level": "info",
          "datastore_type": "kubernetes",
          "nodename": "__KUBERNETES_NODE_NAME__",
          "mtu": __CNI_MTU__,
          "ipam": {
            "type": "host-local",
            "subnet": "usePodCidr"
          },
          "policy": {
              "type": "k8s"
          },
          "kubernetes": {
              "kubeconfig": "__KUBECONFIG_FILEPATH__"
          }
        },
        {
          "type": "portmap",
          "snat": true,
          "capabilities": {"portMappings": true}
        }
      ]
    }

---


# This manifest creates a Service,
# which will be backed by Calico's Typha daemon.
# Typha sits in between Felix and the API server,
# reducing Calico's load on the API server.

apiVersion: v1
kind: Service
metadata:
  name: calico-typha
  namespace: kube-system
  labels:
    k8s-app: calico-typha
spec:
  ports:
    - port: 5473
      protocol: TCP
      targetPort: calico-typha
      name: calico-typha
  selector:
    k8s-app: calico-typha

---

# This manifest creates a Deployment of Typha to back the above service.

apiVersion: apps/v1beta1
kind: Deployment
metadata:
  name: calico-typha
  namespace: kube-system
  labels:
    k8s-app: calico-typha
spec:
  # Number of Typha replicas.
  # To enable Typha, set this to a non-zero value *and* set the
  # typha_service_name variable in the calico-config ConfigMap above.
  #
  # We recommend using Typha if you have more than 50 nodes.
  # Above 100 nodes it is essential
  # (when using the Kubernetes datastore).
  # Use one replica for every 100-200 nodes.  In production,
  # we recommend running at least 3 replicas to reduce the
  # impact of rolling upgrade.
  replicas: 0
  revisionHistoryLimit: 2
  template:
    metadata:
      labels:
        k8s-app: calico-typha
      annotations:
        # This, along with the CriticalAddonsOnly toleration below,
        # marks the pod as a critical
        # add-on, ensuring it gets priority scheduling
        # and that its resources are reserved
        # if it ever gets evicted.
        scheduler.alpha.kubernetes.io/critical-pod: ''
        cluster-autoscaler.kubernetes.io/safe-to-evict: 'true'
    spec:
      nodeSelector:
        beta.kubernetes.io/os: linux
      hostNetwork: true
      tolerations:
        # Mark the pod as a critical add-on for rescheduling.
        - key: CriticalAddonsOnly
          operator: Exists
      # Since Calico can't network a pod until Typha is up,
      # we need to run Typha itself as a host-networked pod.
      serviceAccountName: calico-node
      containers:
        - image: calico/typha:v3.3.4
          name: calico-typha
          ports:
            - containerPort: 5473
              name: calico-typha
              protocol: TCP
          env:
            # Enable "info" logging by default.
            # Can be set to "debug" to increase verbosity.
            - name: TYPHA_LOGSEVERITYSCREEN
              value: "info"
            # Disable logging to file and syslog
            # since those don't make sense in K8s.
            - name: TYPHA_LOGFILEPATH
              value: "none"
            - name: TYPHA_LOGSEVERITYSYS
              value: "none"
            # Monitor the Kubernetes API to find the number of running instances
            # and rebalance connections.
            - name: TYPHA_CONNECTIONREBALANCINGMODE
              value: "kubernetes"
            - name: TYPHA_DATASTORETYPE
              value: "kubernetes"
            - name: TYPHA_HEALTHENABLED
              value: "true"
              # Uncomment these lines to enable prometheus metrics.
              # Since Typha is host-networked,
              # this opens a port on the host, which may need to be secured.
              # - name: TYPHA_PROMETHEUSMETRICSENABLED
              #  value: "true"
              # - name: TYPHA_PROMETHEUSMETRICSPORT
              #  value: "9093"
          livenessProbe:
            exec:
              command:
                - calico-typha
                - check
                - liveness
            periodSeconds: 30
            initialDelaySeconds: 30
          readinessProbe:
            exec:
              command:
                - calico-typha
                - check
                - readiness
            periodSeconds: 10
---

# This manifest creates a Pod Disruption Budget
# for Typha to allow K8s Cluster Autoscaler to evict

apiVersion: policy/v1beta1
kind: PodDisruptionBudget
metadata:
  name: calico-typha
  namespace: kube-system
  labels:
    k8s-app: calico-typha
spec:
  maxUnavailable: 1
  selector:
    matchLabels:
      k8s-app: calico-typha

---

# This manifest installs the calico/node container, as well
# as the Calico CNI plugins and network config on
# each master and worker node in a Kubernetes cluster.
kind: DaemonSet
apiVersion: extensions/v1beta1
metadata:
  name: calico-node
  namespace: kube-system
  labels:
    k8s-app: calico-node
spec:
  selector:
    matchLabels:
      k8s-app: calico-node
  updateStrategy:
    type: RollingUpdate
    rollingUpdate:
      maxUnavailable: 1
  template:
    metadata:
      labels:
        k8s-app: calico-node
      annotations:
        # This, along with the CriticalAddonsOnly toleration below,
        # marks the pod as a critical add-on, ensuring it gets
        # priority scheduling and that its resources are reserved
        # if it ever gets evicted.
        scheduler.alpha.kubernetes.io/critical-pod: ''
    spec:
      nodeSelector:
        beta.kubernetes.io/os: linux
      hostNetwork: true
      tolerations:
        # Make sure calico-node gets scheduled on all nodes.
        - effect: NoSchedule
          operator: Exists
        # Mark the pod as a critical add-on for rescheduling.
        - key: CriticalAddonsOnly
          operator: Exists
        - effect: NoExecute
          operator: Exists
      serviceAccountName: calico-node
      # Minimize downtime during a rolling upgrade or deletion;
      # tell Kubernetes to do a "force deletion"
      # https://kubernetes.io/docs/concepts
      # /workloads/pods/pod/#termination-of-pods.
      terminationGracePeriodSeconds: 0
      containers:
        # Runs calico/node container on each Kubernetes node.  This
        # container programs network policy and routes on each
        # host.
        - name: calico-node
          image: calico/node:v3.3.4
          env:
            # Use Kubernetes API as the backing datastore.
            - name: DATASTORE_TYPE
              value: "kubernetes"
            # Typha support: controlled by the ConfigMap.
            - name: FELIX_TYPHAK8SSERVICENAME
              valueFrom:
                configMapKeyRef:
                  name: calico-config
                  key: typha_service_name
            # Wait for the datastore.
            - name: WAIT_FOR_DATASTORE
              value: "true"
            # Set based on the k8s node name.
            - name: NODENAME
              valueFrom:
                fieldRef:
                  fieldPath: spec.nodeName
            # Choose the backend to use.
            - name: CALICO_NETWORKING_BACKEND
              valueFrom:
                configMapKeyRef:
                  name: calico-config
                  key: calico_backend
            # Cluster type to identify the deployment type
            - name: CLUSTER_TYPE
              value: "k8s,bgp"
            # Auto-detect the BGP IP address.
            - name: IP
              value: "autodetect"
            # Enable IPIP
            - name: CALICO_IPV4POOL_IPIP
              value: "Always"
            # Set MTU for tunnel device used if ipip is enabled
            - name: FELIX_IPINIPMTU
              valueFrom:
                configMapKeyRef:
                  name: calico-config
                  key: veth_mtu
            # The default IPv4 pool to create on startup if none exists.
            # Pod IPs will be   chosen from this range.
            # Changing this value after installation will have
            # no effect. This should fall within `--cluster-cidr`.
            - name: CALICO_IPV4POOL_CIDR
              value: "192.168.0.0/16"
            # Disable file logging so `kubectl logs` works.
            - name: CALICO_DISABLE_FILE_LOGGING
              value: "true"
            # Set Felix endpoint to host default action to ACCEPT.
            - name: FELIX_DEFAULTENDPOINTTOHOSTACTION
              value: "ACCEPT"
            # Disable IPv6 on Kubernetes.
            - name: FELIX_IPV6SUPPORT
              value: "false"
            # Set Felix logging to "info"
            - name: FELIX_LOGSEVERITYSCREEN
              value: "info"
            - name: FELIX_HEALTHENABLED
              value: "true"
          securityContext:
            privileged: true
          resources:
            requests:
              cpu: 250m
          livenessProbe:
            httpGet:
              path: /liveness
              port: 9099
              host: localhost
            periodSeconds: 10
            initialDelaySeconds: 10
            failureThreshold: 6
          readinessProbe:
            exec:
              command:
                - /bin/calico-node
                - -bird-ready
                - -felix-ready
            periodSeconds: 10
          volumeMounts:
            - mountPath: /lib/modules
              name: lib-modules
              readOnly: true
            - mountPath: /run/xtables.lock
              name: xtables-lock
              readOnly: false
            - mountPath: /var/run/calico
              name: var-run-calico
              readOnly: false
            - mountPath: /var/lib/calico
              name: var-lib-calico
              readOnly: false
        # This container installs the Calico CNI binaries
        # and CNI network config file on each node.
        - name: install-cni
          image: calico/cni:v3.3.4
          command: ["/install-cni.sh"]
          env:
            # Name of the CNI config file to create.
            - name: CNI_CONF_NAME
              value: "10-calico.conflist"
            # Set the hostname based on the k8s node name.
            - name: KUBERNETES_NODE_NAME
              valueFrom:
                fieldRef:
                  fieldPath: spec.nodeName
            # The CNI network config to install on each node.
            - name: CNI_NETWORK_CONFIG
              valueFrom:
                configMapKeyRef:
                  name: calico-config
                  key: cni_network_config
            # CNI MTU Config variable
            - name: CNI_MTU
              valueFrom:
                configMapKeyRef:
                  name: calico-config
                  key: veth_mtu
          volumeMounts:
            - mountPath: /host/opt/cni/bin
              name: cni-bin-dir
            - mountPath: /host/etc/cni/net.d
              name: cni-net-dir
      volumes:
        # Used by calico/node.
        - name: lib-modules
          hostPath:
            path: /lib/modules
        - name: var-run-calico
          hostPath:
            path: /var/run/calico
        - name: var-lib-calico
          hostPath:
            path: /var/lib/calico
        - name: xtables-lock
          hostPath:
            path: /run/xtables.lock
            type: FileOrCreate
        # Used to install CNI.
        - name: cni-bin-dir
          hostPath:
            path: /opt/cni/bin
        - name: cni-net-dir
          hostPath:
            path: /etc/cni/net.d
---

apiVersion: v1
kind: ServiceAccount
metadata:
  name: calico-node
  namespace: kube-system

---

# Create all the CustomResourceDefinitions needed for
# Calico policy and networking mode.

apiVersion: apiextensions.k8s.io/v1beta1
kind: CustomResourceDefinition
metadata:
  name: felixconfigurations.crd.projectcalico.org
spec:
  scope: Cluster
  group: crd.projectcalico.org
  version: v1
  names:
    kind: FelixConfiguration
    plural: felixconfigurations
    singular: felixconfiguration
---

apiVersion: apiextensions.k8s.io/v1beta1
kind: CustomResourceDefinition
metadata:
  name: bgppeers.crd.projectcalico.org
spec:
  scope: Cluster
  group: crd.projectcalico.org
  version: v1
  names:
    kind: BGPPeer
    plural: bgppeers
    singular: bgppeer

---

apiVersion: apiextensions.k8s.io/v1beta1
kind: CustomResourceDefinition
metadata:
  name: bgpconfigurations.crd.projectcalico.org
spec:
  scope: Cluster
  group: crd.projectcalico.org
  version: v1
  names:
    kind: BGPConfiguration
    plural: bgpconfigurations
    singular: bgpconfiguration

---

apiVersion: apiextensions.k8s.io/v1beta1
kind: CustomResourceDefinition
metadata:
  name: ippools.crd.projectcalico.org
spec:
  scope: Cluster
  group: crd.projectcalico.org
  version: v1
  names:
    kind: IPPool
    plural: ippools
    singular: ippool

---

apiVersion: apiextensions.k8s.io/v1beta1
kind: CustomResourceDefinition
metadata:
  name: hostendpoints.crd.projectcalico.org
spec:
  scope: Cluster
  group: crd.projectcalico.org
  version: v1
  names:
    kind: HostEndpoint
    plural: hostendpoints
    singular: hostendpoint

---

apiVersion: apiextensions.k8s.io/v1beta1
kind: CustomResourceDefinition
metadata:
  name: clusterinformations.crd.projectcalico.org
spec:
  scope: Cluster
  group: crd.projectcalico.org
  version: v1
  names:
    kind: ClusterInformation
    plural: clusterinformations
    singular: clusterinformation

---

apiVersion: apiextensions.k8s.io/v1beta1
kind: CustomResourceDefinition
metadata:
  name: globalnetworkpolicies.crd.projectcalico.org
spec:
  scope: Cluster
  group: crd.projectcalico.org
  version: v1
  names:
    kind: GlobalNetworkPolicy
    plural: globalnetworkpolicies
    singular: globalnetworkpolicy

---

apiVersion: apiextensions.k8s.io/v1beta1
kind: CustomResourceDefinition
metadata:
  name: globalnetworksets.crd.projectcalico.org
spec:
  scope: Cluster
  group: crd.projectcalico.org
  version: v1
  names:
    kind: GlobalNetworkSet
    plural: globalnetworksets
    singular: globalnetworkset

---

apiVersion: apiextensions.k8s.io/v1beta1
kind: CustomResourceDefinition
metadata:
  name: networkpolicies.crd.projectcalico.org
spec:
  scope: Namespaced
  group: crd.projectcalico.org
  version: v1
  names:
    kind: NetworkPolicy
    plural: networkpolicies
    singular: networkpolicy