set -eu -o pipefail
CLUSTER_NAME=cluster-test
-
-# Get MAC and IP addresses of VMs provisioned by metal3
-master0=$(virsh net-dhcp-leases baremetal |grep master-0)
-masterMAC=$(echo $master0 | cut -d " " -f 3)
-masterIP=$(echo $master0 | cut -d " " -f 5)
-masterIP="${masterIP%%/*}"
-
-worker0=$(virsh net-dhcp-leases baremetal |grep worker-0)
-workerMAC=$(echo $worker0 | cut -d " " -f 3)
-workerIP=$(echo $worker0 | cut -d " " -f 5)
-workerIP="${workerIP%%/*}"
-
-# Create Fake DHCP File
-mkdir -p /opt/icn/dhcp
-cat <<EOF > /opt/icn/dhcp/dhcpd.leases
-# The format of this file is documented in the dhcpd.leases(5) manual page.
-# This lease file was written by isc-dhcp-4.3.5
-
-# authoring-byte-order entry is generated, DO NOT DELETE
-authoring-byte-order little-endian;
-
-lease ${masterIP} {
- starts 4 2019/08/08 22:32:49;
- ends 4 2019/08/08 23:52:49;
- cltt 4 2019/08/08 22:32:49;
- binding state active;
- next binding state free;
- rewind binding state free;
- hardware ethernet ${masterMAC};
- client-hostname "master-0";
-}
-lease ${workerIP} {
- starts 4 2019/08/08 22:32:49;
- ends 4 2019/08/08 23:52:49;
- cltt 4 2019/08/08 22:32:49;
- binding state active;
- next binding state free;
- rewind binding state free;
- hardware ethernet ${workerMAC};
- client-hostname "worker-0";
-}
-EOF
+ADDONS_NAMESPACE=kud
+NUM_MASTERS=${NUM_MASTERS:-"1"}
+NUM_WORKERS=${NUM_WORKERS:-"1"}
# Create provisioning CR file for testing
cat <<EOF > e2etest/e2e_test_provisioning_cr.yaml
owner: c1
spec:
masters:
- - master-0:
- mac-address: ${masterMAC}
+EOF
+for ((master=0;master<NUM_MASTERS;++master)); do
+ mac=$(virsh domiflist "master_${master}" | awk '/provisioning/ {print $5}')
+ cat <<EOF >> e2etest/e2e_test_provisioning_cr.yaml
+ - master-${master}:
+ mac-address: ${mac}
+EOF
+done
+cat <<EOF >> e2etest/e2e_test_provisioning_cr.yaml
workers:
- - worker-0:
- mac-address: ${workerMAC}
+EOF
+for ((worker=0;worker<NUM_WORKERS;++worker)); do
+ mac=$(virsh domiflist "worker_${worker}" | awk '/provisioning/ {print $5}')
+ cat <<EOF >> e2etest/e2e_test_provisioning_cr.yaml
+ - worker-${worker}:
+ mac-address: ${mac}
+EOF
+done
+cat <<EOF >> e2etest/e2e_test_provisioning_cr.yaml
+ KUDPlugins:
+ - emco
EOF
kubectl apply -f e2etest/e2e_test_provisioning_cr.yaml
sleep 5
while [[ $status == "Running" ]]
do
- echo "KUD install job still running"
- sleep 2m
- stats=$(kubectl get pods |grep -i kud-${CLUSTER_NAME})
- status=$(echo $stats | cut -d " " -f 3)
+ echo "KUD install job still running"
+ sleep 2m
+ stats=$(kubectl get pods |grep -i kud-${CLUSTER_NAME})
+ status=$(echo $stats | cut -d " " -f 3)
done
+#Print logs of Job Pod
+jobPod=$(kubectl get pods|grep kud-${CLUSTER_NAME})
+podName=$(echo $jobPod | cut -d " " -f 1)
+printf "\nNow Printing Job pod logs\n"
+kubectl logs $podName
+
if [[ $status == "Completed" ]];
then
printf "KUD Install Job completed\n"
printf "Checking cluster status\n"
source ../../env/lib/common.sh
- KUBECONFIG=--kubeconfig=/opt/kud/multi-cluster/${CLUSTER_NAME}/artifacts/admin.conf
- APISERVER=$(kubectl ${KUBECONFIG} config view --minify -o jsonpath='{.clusters[0].cluster.server}')
- TOKEN=$(kubectl ${KUBECONFIG} get secret $(kubectl ${KUBECONFIG} get serviceaccount default -o jsonpath='{.secrets[0].name}') -o jsonpath='{.data.token}' | base64 --decode )
+ CLUSTER_KUBECONFIG=/opt/kud/multi-cluster/${CLUSTER_NAME}/artifacts/admin.conf
+ APISERVER=$(KUBECONFIG=${CLUSTER_KUBECONFIG} kubectl config view --minify -o jsonpath='{.clusters[0].cluster.server}')
+ TOKEN=$(KUBECONFIG=${CLUSTER_KUBECONFIG} kubectl get secret $(KUBECONFIG=${CLUSTER_KUBECONFIG} kubectl get serviceaccount default -o jsonpath='{.secrets[0].name}') -o jsonpath='{.data.token}' | base64 --decode)
if ! call_api $APISERVER/api --header "Authorization: Bearer $TOKEN" --insecure;
then
- printf "\nKubernetes Cluster Install did not complete successfully\n"
+ printf "\nKubernetes Cluster Install did not complete successfully\n"
+ exit 1
else
- printf "\nKubernetes Cluster Install was successful\n"
+ printf "\nKubernetes Cluster Install was successful\n"
fi
else
- printf "KUD Install Job failed\n"
+ printf "KUD Install Job failed\n"
+ exit 1
fi
+function wait_for {
+ local -r interval=30
+ for ((try=0;try<600;try+=${interval})); do
+ echo "$(date +%H:%M:%S) - Waiting for $*"
+ sleep ${interval}s
+ if $*; then return 0; fi
+ done
+ return 1
+}
-#Print logs of Job Pod
-jobPod=$(kubectl get pods|grep kud-${CLUSTER_NAME})
-podName=$(echo $jobPod | cut -d " " -f 1)
-printf "\nNow Printing Job pod logs\n"
-kubectl logs $podName
+function emco_ready {
+ KUBECONFIG=${CLUSTER_KUBECONFIG} kubectl -n emco wait pod --all --for=condition=Ready --timeout=0s 1>/dev/null 2>/dev/null
+}
+
+function emcoctl_apply {
+ [[ $(/opt/kud/multi-cluster/${CLUSTER_NAME}/artifacts/emcoctl.sh apply -f $@ -v values.yaml |
+ awk '/Response Code:/ {code=$3} END{print code}') =~ 2.. ]]
+}
+
+function emcoctl_delete {
+ [[ $(/opt/kud/multi-cluster/${CLUSTER_NAME}/artifacts/emcoctl.sh delete -f $@ -v values.yaml |
+ awk '/Response Code:/ {code=$3} END{print code}') =~ 404 ]]
+}
+
+function emcoctl_instantiate {
+ [[ $(/opt/kud/multi-cluster/${CLUSTER_NAME}/artifacts/emcoctl.sh apply projects/kud/composite-apps/$@/v1/deployment-intent-groups/deployment/instantiate |
+ awk '/Response Code:/ {code=$3} END{print code}') =~ 2.. ]]
+}
+
+function emcoctl_terminate {
+ [[ $(/opt/kud/multi-cluster/${CLUSTER_NAME}/artifacts/emcoctl.sh apply projects/kud/composite-apps/$@/v1/deployment-intent-groups/deployment/terminate |
+ awk '/Response Code:/ {code=$3} END{print code}') =~ 2.. ]]
+}
+
+function emcoctl {
+ local -r op=$1
+ shift
+
+ local -r interval=2
+ for ((try=0;try<600;try+=${interval})); do
+ if emco_ready; then break; fi
+ echo "$(date +%H:%M:%S) - Waiting for emco"
+ sleep ${interval}s
+ done
+
+ for ((;try<600;try+=${interval})); do
+ case ${op} in
+ "apply") if emcoctl_apply $@; then return 0; fi ;;
+ "delete") if emcoctl_delete $@; then return 0; fi ;;
+ "instantiate") if emcoctl_instantiate $@; then return 0; fi ;;
+ "terminate") if emcoctl_terminate $@; then return 0; fi ;;
+ esac
+ echo "$(date +%H:%M:%S) - Waiting for emcoctl ${op} $@"
+ sleep ${interval}s
+ done
+
+ return 1
+}
+
+function addons_instantiated {
+ KUBECONFIG=${CLUSTER_KUBECONFIG} kubectl -n ${ADDONS_NAMESPACE} wait pod -l app.kubernetes.io/instance=r1 --for=condition=Ready --timeout=0s 1>/dev/null 2>/dev/null
+}
+
+function addons_terminated {
+ [[ $(KUBECONFIG=${CLUSTER_KUBECONFIG} kubectl -n ${ADDONS_NAMESPACE} get pod -l app.kubernetes.io/instance=r1 --no-headers 2>/dev/null | wc -l) == 0 ]]
+}
+
+function networks_instantiated {
+ local -r count=$(KUBECONFIG=${CLUSTER_KUBECONFIG} kubectl -n ${ADDONS_NAMESPACE} get sriovnetworknodestate --no-headers 2>/dev/null | wc -l)
+ local -r succeeded=$(KUBECONFIG=${CLUSTER_KUBECONFIG} kubectl -n ${ADDONS_NAMESPACE} get sriovnetworknodestate -o jsonpath='{range .items[*]}{.status.syncStatus}{"\n"}{end}' 2>/dev/null | grep "Succeeded" | wc -l)
+ [[ $count == $succeeded ]]
+}
+
+function networks_terminated {
+ # The syncStatus will be the same whether we are instantiating or terminating an SR-IOV network
+ networks_instantiated
+}
+
+function kubevirt_instantiated {
+ [[ $(KUBECONFIG=${CLUSTER_KUBECONFIG} kubectl -n ${ADDONS_NAMESPACE} get kubevirt -o jsonpath='{range .items[*]}{.status.phase}{"\n"}{end}' 2>/dev/null | grep "Deployed" | wc -l) == 1 ]]
+ [[ $(KUBECONFIG=${CLUSTER_KUBECONFIG} kubectl -n ${ADDONS_NAMESPACE} get cdi -o jsonpath='{range .items[*]}{.status.phase}{"\n"}{end}' 2>/dev/null | grep "Deployed" | wc -l) == 1 ]]
+}
+
+function kubevirt_terminated {
+ [[ $(KUBECONFIG=${CLUSTER_KUBECONFIG} kubectl -n ${ADDONS_NAMESPACE} get kubevirt --no-headers 2>/dev/null | wc -l) == 0 ]]
+ [[ $(KUBECONFIG=${CLUSTER_KUBECONFIG} kubectl -n ${ADDONS_NAMESPACE} get cdi --no-headers 2>/dev/null | wc -l) == 0 ]]
+}
+
+#Apply addons
+printf "Applying KUD addons\n"
+pushd /opt/kud/multi-cluster/${CLUSTER_NAME}/artifacts/addons
+emcoctl apply 00-controllers.yaml
+emcoctl apply 01-cluster.yaml
+emcoctl apply 02-project.yaml
+emcoctl apply 03-addons-app.yaml
+popd
+
+#Instantiate addons
+emcoctl instantiate addons
+wait_for addons_instantiated
+emcoctl instantiate networks
+wait_for networks_instantiated
+emcoctl instantiate kubevirt
+wait_for kubevirt_instantiated
+
+#Test addons
+printf "Testing KUD addons\n"
+pushd /opt/kud/multi-cluster/addons/tests
+failed_kud_tests=""
+container_runtime=$(KUBECONFIG=${CLUSTER_KUBECONFIG} kubectl get nodes -o jsonpath='{.items[].status.nodeInfo.containerRuntimeVersion}')
+if [[ "${container_runtime}" == "containerd://1.2.13" ]]; then
+ #With containerd 1.2.13, the qat test container image fails to unpack.
+ kud_tests="topology-manager-sriov kubevirt multus ovn4nfv nfd sriov-network cmk"
+else
+ kud_tests="topology-manager-sriov kubevirt multus ovn4nfv nfd sriov-network qat cmk"
+fi
+for test in ${kud_tests}; do
+ KUBECONFIG=${CLUSTER_KUBECONFIG} bash ${test}.sh || failed_kud_tests="${failed_kud_tests} ${test}"
+done
+KUBECONFIG=${CLUSTER_KUBECONFIG} DEMO_FOLDER=${PWD} PATH=/opt/kud/multi-cluster/${CLUSTER_NAME}/artifacts:${PATH} bash plugin_fw_v2.sh --external || failed_kud_tests="${failed_kud_tests} plugin_fw_v2"
+if [[ ! -z "$failed_kud_tests" ]]; then
+ printf "Test cases failed:${failed_kud_tests}\n"
+ exit 1
+fi
+popd
+printf "All test cases passed\n"
-#Teardown Setup
-printf "\n\nBeginning E2E Test Teardown\n\n"
+#Tear down setup
+printf "\n\nBeginning BMH E2E Test Teardown\n\n"
+emcoctl terminate kubevirt
+wait_for kubevirt_terminated
+emcoctl terminate networks
+wait_for networks_terminated
+emcoctl terminate addons
+wait_for addons_terminated
+pushd /opt/kud/multi-cluster/${CLUSTER_NAME}/artifacts/addons
+emcoctl delete 03-addons-app.yaml
+emcoctl delete 02-project.yaml
+emcoctl delete 01-cluster.yaml
+emcoctl delete 00-controllers.yaml
+popd
kubectl delete -f e2etest/e2e_test_provisioning_cr.yaml
kubectl delete job kud-${CLUSTER_NAME}
-kubectl delete configmap ${CLUSTER_NAME}-configmap
+kubectl delete --ignore-not-found=true configmap ${CLUSTER_NAME}-configmap
rm e2etest/e2e_test_provisioning_cr.yaml
rm -rf /opt/kud/multi-cluster/${CLUSTER_NAME}
-rm /opt/icn/dhcp/dhcpd.leases
+rm -rf /opt/kud/multi-cluster/addons
make delete
Code Review / icn.git / blobdiff