-#!/bin/bash
+#!/usr/bin/env bash
+set -eu -o pipefail
-# Get MAC and IP addresses of VMs provisioned by metal3
-master0=$(virsh net-dhcp-leases baremetal |grep master-0)
-masterMAC=$(echo $master0 | cut -d " " -f 3)
-masterIP=$(echo $master0 | cut -d " " -f 5)
-masterIP="${masterIP%%/*}"
-
-worker0=$(virsh net-dhcp-leases baremetal |grep worker-0)
-workerMAC=$(echo $worker0 | cut -d " " -f 3)
-workerIP=$(echo $worker0 | cut -d " " -f 5)
-workerIP="${workerIP%%/*}"
+CLUSTER_NAME=cluster-test
+NUM_MASTERS=${NUM_MASTERS:-"1"}
+NUM_WORKERS=${NUM_WORKERS:-"1"}
# Create Fake DHCP File
mkdir -p /opt/icn/dhcp
# authoring-byte-order entry is generated, DO NOT DELETE
authoring-byte-order little-endian;
-lease ${masterIP} {
+EOF
+for ((master=0;master<NUM_MASTERS;++master)); do
+ lease=$(virsh net-dhcp-leases baremetal |grep "master-${master}")
+ mac=$(echo $lease | cut -d " " -f 3)
+ ip=$(echo $lease | cut -d " " -f 5)
+ ip="${ip%%/*}"
+ cat <<EOF >> /opt/icn/dhcp/dhcpd.leases
+lease ${ip} {
starts 4 2019/08/08 22:32:49;
ends 4 2019/08/08 23:52:49;
cltt 4 2019/08/08 22:32:49;
binding state active;
next binding state free;
rewind binding state free;
- hardware ethernet ${masterMAC};
- client-hostname "master-0";
+ hardware ethernet ${mac};
+ client-hostname "master-${master}";
}
-lease ${workerIP} {
+EOF
+done
+for ((worker=0;worker<NUM_WORKERS;++worker)); do
+ lease=$(virsh net-dhcp-leases baremetal |grep "worker-${worker}")
+ mac=$(echo $lease | cut -d " " -f 3)
+ ip=$(echo $lease | cut -d " " -f 5)
+ ip="${ip%%/*}"
+ cat <<EOF >> /opt/icn/dhcp/dhcpd.leases
+lease ${ip} {
starts 4 2019/08/08 22:32:49;
ends 4 2019/08/08 23:52:49;
cltt 4 2019/08/08 22:32:49;
binding state active;
next binding state free;
rewind binding state free;
- hardware ethernet ${workerMAC};
- client-hostname "worker-0";
+ hardware ethernet ${mac};
+ client-hostname "worker-${worker}";
}
EOF
+done
# Create provisioning CR file for testing
cat <<EOF > e2etest/e2e_test_provisioning_cr.yaml
metadata:
name: e2e-test-provisioning
labels:
- cluster: cluster-test
+ cluster: ${CLUSTER_NAME}
owner: c1
spec:
masters:
- - master-0:
- mac-address: ${masterMAC}
+EOF
+for ((master=0;master<NUM_MASTERS;++master)); do
+ lease=$(virsh net-dhcp-leases baremetal |grep "master-${master}")
+ mac=$(echo $lease | cut -d " " -f 3)
+ cat <<EOF >> e2etest/e2e_test_provisioning_cr.yaml
+ - master-${master}:
+ mac-address: ${mac}
+EOF
+done
+cat <<EOF >> e2etest/e2e_test_provisioning_cr.yaml
workers:
- - worker-0:
- mac-address: ${workerMAC}
+EOF
+for ((worker=0;worker<NUM_WORKERS;++worker)); do
+ lease=$(virsh net-dhcp-leases baremetal |grep "worker-${worker}")
+ mac=$(echo $lease | cut -d " " -f 3)
+ cat <<EOF >> e2etest/e2e_test_provisioning_cr.yaml
+ - worker-${worker}:
+ mac-address: ${mac}
+EOF
+done
+cat <<EOF >> e2etest/e2e_test_provisioning_cr.yaml
+ KUDPlugins:
+ - emco
EOF
kubectl apply -f e2etest/e2e_test_provisioning_cr.yaml
sleep 5
while [[ $status == "Running" ]]
do
- echo "KUD install job still running"
- sleep 2m
- stats=$(kubectl get pods |grep -i kud-cluster-test)
- status=$(echo $stats | cut -d " " -f 3)
+ echo "KUD install job still running"
+ sleep 2m
+ stats=$(kubectl get pods |grep -i kud-${CLUSTER_NAME})
+ status=$(echo $stats | cut -d " " -f 3)
done
+#Print logs of Job Pod
+jobPod=$(kubectl get pods|grep kud-${CLUSTER_NAME})
+podName=$(echo $jobPod | cut -d " " -f 1)
+printf "\nNow Printing Job pod logs\n"
+kubectl logs $podName
+
if [[ $status == "Completed" ]];
then
printf "KUD Install Job completed\n"
printf "Checking cluster status\n"
source ../../env/lib/common.sh
- CLUSTER_NAME=cluster-test
- KUBECONFIG=--kubeconfig=/opt/kud/multi-cluster/${CLUSTER_NAME}/artifacts/admin.conf
- APISERVER=$(kubectl ${KUBECONFIG} config view --minify -o jsonpath='{.clusters[0].cluster.server}')
- TOKEN=$(kubectl ${KUBECONFIG} get secret $(kubectl ${KUBECONFIG} get serviceaccount default -o jsonpath='{.secrets[0].name}') -o jsonpath='{.data.token}' | base64 --decode )
- call_api $APISERVER/api --header "Authorization: Bearer $TOKEN" --insecure
- ret=$?
- if [[ $ret != 0 ]];
+ CLUSTER_KUBECONFIG=/opt/kud/multi-cluster/${CLUSTER_NAME}/artifacts/admin.conf
+ APISERVER=$(KUBECONFIG=${CLUSTER_KUBECONFIG} kubectl config view --minify -o jsonpath='{.clusters[0].cluster.server}')
+ TOKEN=$(KUBECONFIG=${CLUSTER_KUBECONFIG} kubectl get secret $(KUBECONFIG=${CLUSTER_KUBECONFIG} kubectl get serviceaccount default -o jsonpath='{.secrets[0].name}') -o jsonpath='{.data.token}' | base64 --decode)
+ if ! call_api $APISERVER/api --header "Authorization: Bearer $TOKEN" --insecure;
then
- printf "\nKubernetes Cluster Install did not complete successfully\n"
+ printf "\nKubernetes Cluster Install did not complete successfully\n"
+ exit 1
else
- printf "\nKubernetes Cluster Install was successful\n"
+ printf "\nKubernetes Cluster Install was successful\n"
fi
else
- printf "KUD Install Job failed\n"
+ printf "KUD Install Job failed\n"
+ exit 1
fi
+function emcoctl_apply {
+ # Workaround known issue with emcoctl resource instantation by retrying
+ # until a 2xx is received.
+ try=0
+ until [[ $(/opt/kud/multi-cluster/${CLUSTER_NAME}/artifacts/emcoctl.sh apply -f $@ -v values.yaml |
+ awk '/Response Code:/ {code=$3} END{print code}') =~ 2.. ]]; do
+ if [[ $try -lt 10 ]]; then
+ echo "Waiting for KUD addons to terminate"
+ sleep 1s
+ else
+ return 1
+ fi
+ try=$((try + 1))
+ done
+ return 0
+}
-#Print logs of Job Pod
-jobPod=$(kubectl get pods|grep kud-cluster-test)
-podName=$(echo $jobPod | cut -d " " -f 1)
-printf "\nNow Printing Job pod logs\n"
-kubectl logs $podName
+function emcoctl_delete {
+ # Workaround known issue with emcoctl resource deletion by retrying
+ # until a 404 is received.
+ until [[ $(/opt/kud/multi-cluster/${CLUSTER_NAME}/artifacts/emcoctl.sh delete -f $@ -v values.yaml |
+ awk '/Response Code:/ {code=$3} END{print code}') =~ 404 ]]; do
+ echo "Waiting for KUD addons to terminate"
+ sleep 1s
+ done
+}
+
+function wait_for_addons_ready {
+ #Wait for addons to be ready
+ # The deployment intent group status reports instantiated before all
+ # Pods are ready, so wait for the instance label (.spec.version) of
+ # the deployment intent group instead.
+ status="Pending"
+ for try in {0..9}; do
+ printf "Waiting for KUD addons to be ready\n"
+ sleep 30s
+ if KUBECONFIG=${CLUSTER_KUBECONFIG} kubectl wait pod -l app.kubernetes.io/instance=r1 --for=condition=Ready --all-namespaces --timeout=0s 2>/dev/null >/dev/null; then
+ status="Ready"
+ break
+ fi
+ done
+ [[ $status == "Ready" ]]
+}
+
+#Install addons
+printf "Installing KUD addons\n"
+pushd /opt/kud/multi-cluster/${CLUSTER_NAME}/artifacts/addons
+emcoctl_apply 00-controllers.yaml
+emcoctl_apply 01-cluster.yaml
+emcoctl_apply 02-project.yaml
+emcoctl_apply 03-addons-app.yaml
+popd
+wait_for_addons_ready
+
+#Install addon resources
+printf "Installing KUD addon resources\n"
+pushd /opt/kud/multi-cluster/${CLUSTER_NAME}/artifacts/addons
+emcoctl_apply 04-addon-resources-app.yaml
+popd
+wait_for_addons_ready
+
+#Test addons
+printf "Testing KUD addons\n"
+pushd /opt/kud/multi-cluster/addons/tests
+failed_kud_tests=""
+container_runtime=$(KUBECONFIG=${CLUSTER_KUBECONFIG} kubectl get nodes -o jsonpath='{.items[].status.nodeInfo.containerRuntimeVersion}')
+if [[ "${container_runtime}" == "containerd://1.2.13" ]]; then
+ #With containerd 1.2.13, the qat test container image fails to unpack.
+ kud_tests="topology-manager-sriov multus ovn4nfv nfd sriov-network cmk"
+else
+ kud_tests="topology-manager-sriov multus ovn4nfv nfd sriov-network qat cmk"
+fi
+for test in ${kud_tests}; do
+ KUBECONFIG=${CLUSTER_KUBECONFIG} bash ${test}.sh || failed_kud_tests="${failed_kud_tests} ${test}"
+done
+if [[ ! -z "$failed_kud_tests" ]]; then
+ printf "Test cases failed:${failed_kud_tests}\n"
+ exit 1
+fi
+popd
+printf "All test cases passed\n"
-#Teardown Setup
+#Tear down setup
printf "\n\nBeginning E2E Test Teardown\n\n"
+pushd /opt/kud/multi-cluster/${CLUSTER_NAME}/artifacts/addons
+emcoctl_delete 04-addon-resources-app.yaml
+emcoctl_delete 03-addons-app.yaml
+emcoctl_delete 02-project.yaml
+emcoctl_delete 01-cluster.yaml
+emcoctl_delete 00-controllers.yaml
+popd
kubectl delete -f e2etest/e2e_test_provisioning_cr.yaml
-kubectl delete job kud-cluster-test
-kubectl delete configmap cluster-test-configmap
+kubectl delete job kud-${CLUSTER_NAME}
+kubectl delete --ignore-not-found=true configmap ${CLUSTER_NAME}-configmap
rm e2etest/e2e_test_provisioning_cr.yaml
-rm -rf /opt/kud/multi-cluster/cluster-test
+rm -rf /opt/kud/multi-cluster/${CLUSTER_NAME}
+rm -rf /opt/kud/multi-cluster/addons
rm /opt/icn/dhcp/dhcpd.leases
make delete