--- /dev/null
+---
+# Copyright 2015, Rackspace US, Inc.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+## AIO user-space configuration options
+# Scenario used to bootstrap the host
+bootstrap_host_scenario: aio
+#
+# Boolean option to implement OpenStack-Ansible configuration for an AIO
+# Switch to no for a multi-node configuration
+bootstrap_host_aio_config: yes
+#
+# Path to the location of the bootstrapping configuration files
+bootstrap_host_aio_config_path: "{{ playbook_dir }}/../etc/openstack_deploy"
+#
+
+bootstrap_host_aio_config_name: "openstack_user_config.yml.aio"
+
+# Path to the location of the scripts the bootstrap scripts use
+bootstrap_host_aio_script_path: "{{ playbook_dir }}/../scripts"
+#
+# The user space configuration file names to use
+bootstrap_host_user_variables_filename: "user_variables.yml"
+bootstrap_host_user_secrets_filename: "user_secrets.yml"
+
+## Swap memory
+# If there is no swap memory present, the bootstrap will create a loopback disk
+# for the purpose of having swap memory available. Swap is required for some of
+# the services deployed and is useful for AIO's built with less than 16GB memory.
+# By default the swap size is set to 8GB unless the host memory is less than 8GB,
+# in which case it is set to 4GB.
+bootstrap_host_swap_size: "{% if ansible_memory_mb['real']['total'] < 8*1024 %}4{% else %}8{% endif %}"
+
+## Loopback volumes
+# Sparse loopback disks are used for Cinder, Swift and Nova (instance storage).
+# The size of the loopback volumes can be customized here (in gigabytes).
+#
+# Boolean option to deploy the loopback disk for Cinder
+bootstrap_host_loopback_cinder: yes
+# Size of the Cinder loopback disk in gigabytes (GB).
+bootstrap_host_loopback_cinder_size: 1024
+#
+# Boolean option to deploy the loopback disk for Swift
+bootstrap_host_loopback_swift: yes
+# Size of the Swift loopback disk in gigabytes (GB).
+bootstrap_host_loopback_swift_size: 1024
+#
+# Boolean option to deploy the loopback disk for Nova
+bootstrap_host_loopback_nova: yes
+# Size of the Nova loopback disk in gigabytes (GB).
+bootstrap_host_loopback_nova_size: 1024
+
+# Boolean option to deploy the OSD loopback disks and cluster UUID for Ceph
+bootstrap_host_ceph: "{{ (bootstrap_host_scenario == 'ceph') | bool }}"
+# Size of the Ceph OSD loopbacks
+bootstrap_host_loopback_ceph_size: 1024
+# Ceph OSDs to create on the AIO host
+ceph_osd_images:
+ - 'ceph1'
+ - 'ceph2'
+ - 'ceph3'
+
+## Network configuration
+# The AIO bootstrap configures bridges for use with the AIO deployment.
+# By default, these bridges are configured to be independent of any physical
+# interfaces, and they have their 'bridge_ports' set to 'none'. However,
+# deployers can add a physical interface to 'bridge_ports' to connect the
+# bridge to a real physical interface.
+#
+# A setting of 'none' keeps the bridges as independent from physical
+# interfaces (the default).
+#
+# Setting the value to 'eth1' would mean that the bridge is directly connected
+# to the eth1 device.
+#
+# See https://wiki.debian.org/BridgeNetworkConnections for more details.
+bootstrap_host_bridge_mgmt_ports: none
+bootstrap_host_bridge_vxlan_ports: none
+bootstrap_host_bridge_storage_ports: none
+bootstrap_host_bridge_vlan_ports: "br-vlan-veth"
+# This enables the VXLAN encapsulation the traditional bridges
+# (br-mgmt, br-vxlan, br-storage)
+bootstrap_host_encapsulation_enabled: "{{ not bootstrap_host_aio_config | bool }}"
+#
+# Default network IP ranges
+mgmt_range: "172.29.236"
+vxlan_range: "172.29.240"
+storage_range: "172.29.244"
+vlan_range: "172.29.248"
+netmask: "255.255.252.0"
+#
+# NICs
+bootstrap_host_public_interface: "{{ ansible_default_ipv4.interface }}"
+bootstrap_host_encapsulation_interface: eth1
+#
+#Encapsulations
+bootstrap_host_encapsulation_interfaces:
+ encap-mgmt:
+ id: 236
+ underlay_device: "{{ bootstrap_host_encapsulation_interface }}"
+ friendly_name: "Encapsulation of br-mgmt with VXLAN"
+ encap-vxlan:
+ id: 240
+ underlay_device: "{{ bootstrap_host_encapsulation_interface }}"
+ friendly_name: "Encapsulation of br-vxlan with VXLAN"
+ encap-storage:
+ id: 244
+ underlay_device: "{{ bootstrap_host_encapsulation_interface }}"
+ friendly_name: "Encapsulation of br-storage with VXLAN"
+ encap-vlan:
+ id: 248
+ underlay_device: "{{ bootstrap_host_encapsulation_interface }}"
+ friendly_name: "Encapsulation of br-vlan with VXLAN"
+#
+# Bridges
+bridges:
+ - name: "br-mgmt"
+ ip_addr: "172.29.236.100"
+ netmask: "255.255.252.0"
+ - name: "br-vxlan"
+ ip_addr: "172.29.240.100"
+ netmask: "255.255.252.0"
+ - name: "br-storage"
+ ip_addr: "172.29.244.100"
+ netmask: "255.255.252.0"
+ - name: "br-vlan"
+ ip_addr: "172.29.248.100"
+ alias: "172.29.248.1"
+ veth_peer: "eth12"
+ netmask: "255.255.252.0"
+
+bootstrap_host_bridges_interfaces:
+ br-mgmt:
+ ports: "{{ bootstrap_host_encapsulation_enabled | bool | ternary ('encap-mgmt', bootstrap_host_bridge_mgmt_ports) }}"
+ ip_address_range: "{{ mgmt_range }}"
+ ip_netmask: "{{ netmask }}"
+ br-storage:
+ ports: "{{ bootstrap_host_encapsulation_enabled | bool | ternary ('encap-storage', bootstrap_host_bridge_storage_ports) }}"
+ ip_address_range: "{{ storage_range }}"
+ ip_netmask: "{{ netmask }}"
+ br-vxlan:
+ ports: "{{ bootstrap_host_encapsulation_enabled | bool | ternary ('encap-vxlan', bootstrap_host_bridge_vxlan_ports) }}"
+ ip_address_range: "{{ vxlan_range }}"
+ ip_netmask: "{{ netmask }}"
+ br-vlan:
+ mode: "{{ bridge_vlan_inet_mode | default('static') }}"
+ ports: "{{ bootstrap_host_encapsulation_enabled | bool | ternary ('encap-vlan', bootstrap_host_bridge_vlan_ports) }}"
+ ip_address_range: "{{ vlan_range }}"
+ ip_netmask: "{{ netmask }}"
+ state_change_scripts: "{{ bridge_vlan_state_change_scripts }}"
+#
+# Convenience scripts
+bridge_vlan_state_change_scripts: |
+ pre-up ip link add br-vlan-veth type veth peer name eth12 || true
+ pre-up ip link set br-vlan-veth up
+ pre-up ip link set eth12 up
+ post-down ip link del br-vlan-veth || true
+bridge_iptables_rules: |
+ # To ensure ssh checksum is correct
+ up /sbin/iptables -A POSTROUTING -t mangle -p tcp -o {{ bootstrap_host_public_interface }} -j CHECKSUM --checksum-fill
+ down /sbin/iptables -D POSTROUTING -t mangle -p tcp -o {{ bootstrap_host_public_interface }} -j CHECKSUM --checksum-fill
+ # To provide internet connectivity to instances
+ up /sbin/iptables -t nat -A POSTROUTING -o {{ bootstrap_host_public_interface }} -j MASQUERADE
+ down /sbin/iptables -t nat -D POSTROUTING -o {{ bootstrap_host_public_interface }} -j MASQUERADE
+
+## Extra storage
+# An AIO may optionally be built using a second storage device. If a
+# secondary disk device to use is not specified, then the AIO will be
+# built on any existing disk partitions.
+#
+# WARNING: The data on a secondary storage device specified here will
+# be destroyed and repartitioned.
+#
+# Specify the secondary disk device to use.
+bootstrap_host_data_disk_device: null
+#
+# Boolean value to force the repartitioning of the secondary device.
+bootstrap_host_data_disk_device_force: no
+#
+# If the storage capacity on this device is greater than or equal to this
+# size (in GB), the bootstrap process will use it.
+bootstrap_host_data_disk_min_size: 50
+
+### Optional Settings ###
+
+# Set the apt repository URL's configured for the host and containers.
+# By default the configuration will be derived from the host.
+#bootstrap_host_ubuntu_repo: http://archive.ubuntu.com/ubuntu/
+#bootstrap_host_ubuntu_security_repo: http://archive.ubuntu.com/ubuntu/
+
+# Set the components that will be included in the apt repository configuration
+bootstrap_host_apt_components:
+ - main
+ - universe
+
+# Specify the public IP address for the host.
+# By default the address will be set to the ipv4 address of the
+# host's network interface that has the default route on it.
+#bootstrap_host_public_address: 0.0.0.0
+
+
+sudo_user: "ncioadmin"
+# password: ncioadmin
+# Generated with command "openssl passwd -1 -salt ncioadmin ncioadmin"
+sudo_user_password: "$1$ncioadmi$vDa1mNhcMDKMBSI27RqW51"
Code Review / ta / infra-ansible.git / blobdiff