+++ /dev/null
----
-# Drydock BaremetalNode resources for a specific rack are stored in this file.
-#
-# NOTE: For new sites, you should complete the networks/physical/networks.yaml
-# file before working on this file.
-#
-# In this file, you should make the number of `drydock/BaremetalNode/v1`
-# resources equal the number of bare metal nodes you have, either by deleting
-# excess BaremetalNode definitions (if there are too many), or by copying and
-# pasting the last BaremetalNode in the file until you have the correct number
-# of baremetal nodes (if there are too few).
-#
-# Then in each file, address all additional NEWSITE-CHANGEME markers to update
-# the data in these files with the right values for your new site.
-#
-# *NOTE: The Genesis node is counted as one of the control plane nodes. Note
-# that the Genesis node does not appear on this bare metal list, because the
-# procedure to reprovision the Genesis host with MaaS has not yet been
-# implemented. Therefore there will be only three bare metal nodes in this file
-# with the 'masters' tag, as the genesis roles are assigned in a difference
-# place (profiles/genesis.yaml).
-# NOTE: The host profiles for the control plane are further divided into two
-# variants: primary and secondary. The only significance this has is that the
-# "primary" nodes are active Ceph nodes, whereas the "secondary" nodes are Ceph
-# standby nodes. For Ceph quorum, this means that the control plane split will
-# be 3 primary + 1 standby host profile, and the Genesis node counts toward one
-# of the 3 primary profiles. Other control plane services are not affected by
-# primary vs secondary designation.
-#
-# TODO: Include the hostname naming convention
-#
-schema: 'drydock/BaremetalNode/v1'
-metadata:
- schema: 'metadata/Document/v1'
- # NEWSITE-CHANGEME: Replace with the hostname of the first node in the rack,
- # after (excluding) genesis.
- name: cab23-r720-12
- layeringDefinition:
- abstract: false
- layer: site
- storagePolicy: cleartext
-data:
- # NEWSITE-CHANGEME: The IPv4 address assigned to each logical network on this
- # node. In the reference Airship deployment, this is all logical Networks defined
- # in networks/physical/networks.yaml. IP addresses are manually assigned, by-hand.
- # (what could possibly go wrong!) The instructions differ for each logical
- # network, which are laid out below.
- addressing:
- # The iDrac/iLo IP of the node. It's important that this match up with the
- # node's hostname above, so that the rack number and node position encoded
- # in the hostname are accurate and matching the node that IPMI operations
- # will be performed against (for poweron, poweroff, PXE boot to wipe disk or
- # reconfigure identity, etc - very important to get right for these reasons).
- # These addresses should already be assigned to nodes racked and stacked in
- # the environment; these are not addresses which MaaS assigns.
- - network: oob
- address: 10.23.104.12
- # The IP of the node on the PXE network. Refer to the static IP range
- # defined for the PXE network in networks/physical/networks.yaml. Begin allocating
- # IPs from this network, starting with the second IP (inclusive) from the
- # allocation range of this subnet (Genesis node will have the first IP).
- # Ex: If the start IP for the PXE "static" network is 10.23.20.11, then
- # genesis will have 10.23.20.11, this node will have 10.23.20.12, and
- # so on with incrementing IP addresses with each additional node.
- - network: pxe
- address: 10.23.20.12
- # Genesis node gets first IP, all other nodes increment IPs from there
- # within the allocation range defined for the network in
- # networks/physical/networks.yaml
- - network: oam
- address: 10.23.21.12
- # Genesis node gets first IP, all other nodes increment IPs from there
- # within the allocation range defined for the network in
- # networks/physical/networks.yaml
- - network: storage
- address: 10.23.23.12
- # Genesis node gets first IP, all other nodes increment IPs from there
- # within the allocation range defined for the network in
- # networks/physical/networks.yaml
- - network: overlay
- address: 10.23.24.12
- # Genesis node gets first IP, all other nodes increment IPs from there
- # within the allocation range defined for the network in
- # networks/physical/networks.yaml
- - network: calico
- address: 10.23.22.12
- # NEWSITE-CHANGEME: Set the host profile for the node.
- # Note that there are different host profiles depending if this is a control
- # plane vs data plane node, and different profiles that map to different types
- # hardware. Control plane host profiles are further broken down into "primary"
- # and "secondary" profiles (refer to the Notes section at the top of this doc).
- # Select the host profile that matches up to your type of
- # hardware and function. E.g., the r720 here refers to Dell R720 hardware, the
- # 'cp' refers to a control plane profile, and the "primary" means it will be
- # an active member in the ceph quorum. Refer to profiles/host/ for the list
- # of available host profiles specific to this site (otherwise, you may find
- # a general set of host profiles at the "type" or "global" layers/folders.
- # If you have hardware that is not on this list of profiles, you may need to
- # create a new host profile for that hardware.
- # Regarding control plane vs other data plane profiles, refer to the notes at
- # the beginning of this file. There should be one control plane node per rack,
- # including Genesis. Note Genesis won't actually be listed in this file as a
- # BaremetalNode, but the rest are.
- # This is the second "primary" control plane node after Genesis.
- host_profile: cp_r720-primary
- metadata:
- tags:
- # NEWSITE-CHANGEME: See previous comment. Apply 'masters' tag for control
- # plane node, and 'workers' tag for data plane hosts.
- - 'masters'
- # NEWSITE-CHANGEME: Refer to site engineering package or other supporting
- # documentation for the specific rack name. This should be a rack name that
- # is meaningful to data center personnel (i.e. a rack they could locate if
- # you gave them this rack designation).
- rack: cab23
-...
----
-schema: 'drydock/BaremetalNode/v1'
-metadata:
- schema: 'metadata/Document/v1'
- # NEWSITE-CHANGEME: The next node's hostname
- name: cab23-r720-13
- layeringDefinition:
- abstract: false
- layer: site
- storagePolicy: cleartext
-data:
- # NEWSITE-CHANGEME: The next node's IPv4 addressing
- addressing:
- - network: oob
- address: 10.23.104.13
- - network: pxe
- address: 10.23.20.13
- - network: oam
- address: 10.23.21.13
- - network: storage
- address: 10.23.23.13
- - network: overlay
- address: 10.23.24.13
- - network: calico
- address: 10.23.22.13
- # NEWSITE-CHANGEME: The next node's host profile
- host_profile: cp_r720-primary
- metadata:
- # NEWSITE-CHANGEME: The next node's rack designation
- rack: cab23
- # NEWSITE-CHANGEME: The next node's role desigatnion
- tags:
- - 'masters'
-...
----
-schema: 'drydock/BaremetalNode/v1'
-metadata:
- schema: 'metadata/Document/v1'
- # NEWSITE-CHANGEME: The next node's hostname
- name: cab23-r720-14
- layeringDefinition:
- abstract: false
- layer: site
- storagePolicy: cleartext
-data:
- # NEWSITE-CHANGEME: The next node's IPv4 addressing
- addressing:
- - network: oob
- address: 10.23.104.14
- - network: pxe
- address: 10.23.20.14
- - network: oam
- address: 10.23.21.14
- - network: storage
- address: 10.23.23.14
- - network: overlay
- address: 10.23.24.14
- - network: calico
- address: 10.23.22.14
- # NEWSITE-CHANGEME: The next node's host profile
- # This is the third "primary" control plane profile after genesis
- host_profile: cp_r740-secondary
- metadata:
- # NEWSITE-CHANGEME: The next node's rack designation
- rack: cab23
- # NEWSITE-CHANGEME: The next node's role desigatnion
- tags:
- - 'masters'
-...
----
-schema: 'drydock/BaremetalNode/v1'
-metadata:
- schema: 'metadata/Document/v1'
- # NEWSITE-CHANGEME: The next node's hostname
- name: cab23-r720-17
- layeringDefinition:
- abstract: false
- layer: site
- storagePolicy: cleartext
-data:
- # NEWSITE-CHANGEME: The next node's IPv4 addressing
- addressing:
- - network: oob
- address: 10.23.104.17
- - network: pxe
- address: 10.23.20.17
- - network: oam
- address: 10.23.21.17
- - network: storage
- address: 10.23.23.17
- - network: overlay
- address: 10.23.24.17
- - network: calico
- address: 10.23.22.17
- # NEWSITE-CHANGEME: The next node's host profile
- # This is the one and only appearance of the "secondary" control plane profile
- host_profile: dp_r720
- metadata:
- # NEWSITE-CHANGEME: The next node's rack designation
- rack: cab23
- # NEWSITE-CHANGEME: The next node's role desigatnion
- tags:
- - 'workers'
-...
----
-schema: 'drydock/BaremetalNode/v1'
-metadata:
- schema: 'metadata/Document/v1'
- # NEWSITE-CHANGEME: The next node's hostname
- name: cab23-r720-19
- layeringDefinition:
- abstract: false
- layer: site
- storagePolicy: cleartext
-data:
- # NEWSITE-CHANGEME: The next node's IPv4 addressing
- addressing:
- - network: oob
- address: 10.23.104.19
- - network: pxe
- address: 10.23.20.19
- - network: oam
- address: 10.23.21.19
- - network: storage
- address: 10.23.23.19
- - network: overlay
- address: 10.23.24.19
- - network: calico
- address: 10.23.22.19
- # NEWSITE-CHANGEME: The next node's host profile
- host_profile: dp_r720
- metadata:
- # NEWSITE-CHANGEME: The next node's rack designation
- rack: cab23
- # NEWSITE-CHANGEME: The next node's role desigatnion
- tags:
- - 'workers'
-...