+++ /dev/null
----
-# The purpose of this file is to define all of the NetworkLinks (i.e. layer 1
-# devices) and Networks (i.e. layer 3 configurations). The following is standard
-# for the logical networks in Airship:
-#
-# +----------+-----------------------------------+----------------+--------------+----------------------------------------------------+-----------------+
-# | Network | | Per-rack or | | | VLAN tagged |
-# | Name | Purpose | per-site CIDR? | Has gateway? | Bond | or untagged? |
-# +----------+-----------------------------------+----------------+--------------+----------------------------------------------------+-----------------+
-# | oob | Out of Band devices (iDrac/iLo) | per-site CIDR | Has gateway | No bond, N/A | Untagged/Native |
-# | pxe | PXE boot network | per-site CIDR | No gateway | No bond, no LACP fallback. Dedicated PXE interface | Untagged/Native |
-# | oam | management network | per-site CIDR | Has gateway | member of bond0 | tagged |
-# | storage | storage network | per-site CIDR | No gateway | member of bond0 | tagged |
-# | calico | underlay calico net; k8s traffic | per-site CIDR | No gateway | member of bond0 | tagged |
-# | overlay | overlay network for openstack SDN | per-site CIDR | No gateway | member of bond0 | tagged |
-# +----------+-----------------------------------+----------------+--------------+----------------------------------------------------+-----------------+
-#
-# For standard Airship deployments, you should not need to modify the number of
-# NetworkLinks and Networks in this file. Only the IP addresses and CIDRs should
-# need editing.
-#
-# TODO: Given that we expect all network broadcast domains to span all racks in
-# Airship, we should choose network names that do not include the rack number.
-#
-# TODO: FQDN naming standards for hosts
-#
-schema: 'drydock/NetworkLink/v1'
-metadata:
- schema: 'metadata/Document/v1'
- name: oob
- layeringDefinition:
- abstract: false
- layer: site
- storagePolicy: cleartext
-data:
- # MaaS doesnt own this network like it does the others, so the noconfig label
- # is specified.
- labels:
- noconfig: enabled
- bonding:
- mode: disabled
- mtu: 1500
- linkspeed: auto
- trunking:
- mode: disabled
- default_network: oob
- allowed_networks:
- - oob
-...
----
-schema: 'drydock/Network/v1'
-metadata:
- schema: 'metadata/Document/v1'
- name: oob
- layeringDefinition:
- abstract: false
- layer: site
- storagePolicy: cleartext
-data:
- # NEWSITE-CHANGEME: Update with the site's out-of-band CIDR
- cidr: 10.23.104.0/24
- routes:
- # NEWSITE-CHANGEME: Update with the site's out-of-band gateway IP
- - subnet: '0.0.0.0/0'
- gateway: 10.23.104.1
- metric: 100
- # NEWSITE-CHANGEME: Update with the site's out-of-band IP allocation range
- # FIXME: Is this IP range actually used/allocated for anything? The HW already
- # has its OOB IPs assigned. None of the Ubuntu OS's should need IPs on OOB
- # network either, as they should be routable via the default gw on OAM network
- ranges:
- - type: static
- start: 10.23.104.11
- end: 10.23.104.21
-...
----
-schema: 'drydock/NetworkLink/v1'
-metadata:
- schema: 'metadata/Document/v1'
- name: pxe
- layeringDefinition:
- abstract: false
- layer: site
- storagePolicy: cleartext
-data:
- bonding:
- mode: disabled
- mtu: 1500
- linkspeed: auto
- trunking:
- mode: disabled
- default_network: pxe
- allowed_networks:
- - pxe
-...
----
-schema: 'drydock/Network/v1'
-metadata:
- schema: 'metadata/Document/v1'
- name: pxe
- layeringDefinition:
- abstract: false
- layer: site
- storagePolicy: cleartext
-data:
- # NEWSITE-CHANGEME: Update with the site's PXE network CIDR
- # NOTE: The CIDR minimum size = (number of nodes * 2) + 10
- cidr: 10.23.20.0/24
- routes:
- - subnet: 0.0.0.0/0
- # NEWSITE-CHANGEME: Set the OAM network gateway IP address
- gateway: 10.23.20.1
- metric: 100
- # NOTE: The first 10 IPs in the subnet are reserved for network infrastructure.
- # The remainder of the range is divided between two subnets of equal size:
- # one static, and one DHCP.
- # The DHCP addresses are used when nodes perform a PXE boot (DHCP address gets
- # assigned), and when a node is commissioning in MaaS (also uses DHCP to get
- # its IP address). However, when MaaS installs the operating system
- # ("Deploying/Deployed" states), it will write a static IP assignment to
- # /etc/network/interfaces[.d] with IPs from the "static" subnet defined here.
- ranges:
- # NEWSITE-CHANGEME: Update to the first 10 IPs in the CIDR
- - type: reserved
- start: 10.23.20.1
- end: 10.23.20.10
- # NEWSITE-CHANGEME: Update to the first half of the remaining range after
- # excluding the 10 reserved IPs.
- - type: static
- start: 10.23.20.11
- end: 10.23.20.21
- # NEWSITE-CHANGEME: Update to the second half of the remaining range after
- # excluding the 10 reserved IPs.
- - type: dhcp
- start: 10.23.20.121
- end: 10.23.20.131
- dns:
- # NEWSITE-CHANGEME: FQDN for bare metal nodes.
- # Choose FQDN according to the node FQDN naming conventions at the top of
- # this document.
- domain: airship-seaworthy.atlantafoundry.com
- # List of upstream DNS forwards. Verify you can reach them from your
- # environment. If so, you should not need to change them.
- # TODO: This should be populated via substitution from common-addresses
- servers: '8.8.8.8,8.8.4.4,208.67.222.222'
-...
----
-schema: 'drydock/NetworkLink/v1'
-metadata:
- schema: 'metadata/Document/v1'
- name: data
- layeringDefinition:
- abstract: false
- layer: site
- storagePolicy: cleartext
-data:
- bonding:
- mode: 802.3ad
- hash: layer3+4
- peer_rate: fast
- mon_rate: 100
- up_delay: 1000
- down_delay: 3000
- # NEWSITE-CHANGEME: Ensure the network switches in the environment are
- # configured for this MTU or greater. Even if switches are configured for or
- # can support a slightly higher MTU, there is no need (and negliable benefit)
- # to squeeze every last byte into the MTU (e.g., 9216 vs 9100). Leave MTU at
- # 9100 for maximum compatibility.
- mtu: 9100
- linkspeed: auto
- trunking:
- mode: 802.1q
- allowed_networks:
- - oam
- - storage
- - overlay
- - calico
-...
----
-schema: 'drydock/Network/v1'
-metadata:
- schema: 'metadata/Document/v1'
- name: oam
- layeringDefinition:
- abstract: false
- layer: site
- storagePolicy: cleartext
-data:
- # NEWSITE-CHANGEME: Set the VLAN ID which the OAM network is on
- vlan: '21'
- mtu: 9100
- # NEWSITE-CHANGEME: Set the CIDR for the OAM network
- # NOTE: The CIDR minimum size = number of nodes + 10
- cidr: 10.23.21.0/24
- routes:
- - subnet: 0.0.0.0/0
- # NEWSITE-CHANGEME: Set the OAM network gateway IP address
- gateway: 10.23.21.1
- metric: 100
- ranges:
- # NEWSITE-CHANGEME: Update to the first 10 IPs in the CIDR
- - type: reserved
- start: 10.23.21.1
- end: 10.23.21.10
- # NEWSITE-CHANGEME: Update to the remaining range after excluding the 10
- # 10 reserved IPs.
- - type: static
- start: 10.23.21.11
- end: 10.23.21.21
- dns:
- # NEWSITE-CHANGEME: FQDN for bare metal nodes.
- # Choose FQDN according to the node FQDN naming conventions at the top of
- # this document.
- domain: airship-seaworthy.atlantafoundry.com
- # List of upstream DNS forwards. Verify you can reach them from your
- # environment. If so, you should not need to change them.
- # TODO: This should be populated via substitution from common-addresses
- servers: '8.8.8.8,8.8.4.4,208.67.222.222'
-...
----
-schema: 'drydock/Network/v1'
-metadata:
- schema: 'metadata/Document/v1'
- name: storage
- layeringDefinition:
- abstract: false
- layer: site
- storagePolicy: cleartext
-data:
- # NEWSITE-CHANGEME: Set the VLAN ID which the storage network is on
- vlan: '23'
- mtu: 9100
- # NEWSITE-CHANGEME: Set the CIDR for the storage network
- # NOTE: The CIDR minimum size = number of nodes + 10
- cidr: 10.23.23.0/24
- ranges:
- # NEWSITE-CHANGEME: Update to the first 10 IPs in the CIDR
- - type: reserved
- start: 10.23.23.1
- end: 10.23.23.10
- # NEWSITE-CHANGEME: Update to the remaining range after excluding the 10
- # 10 reserved IPs.
- - type: static
- start: 10.23.23.11
- end: 10.23.23.21
-...
----
-schema: 'drydock/Network/v1'
-metadata:
- schema: 'metadata/Document/v1'
- name: overlay
- layeringDefinition:
- abstract: false
- layer: site
- storagePolicy: cleartext
-data:
- # NEWSITE-CHANGEME: Set the VLAN ID which the overlay network is on
- vlan: '24'
- mtu: 9100
- # NEWSITE-CHANGEME: Set the CIDR for the overlay network
- # NOTE: The CIDR minimum size = number of nodes + 10
- cidr: 10.23.24.0/24
- ranges:
- # NEWSITE-CHANGEME: Update to the first 10 IPs in the CIDR
- - type: reserved
- start: 10.23.24.1
- end: 10.23.24.10
- # NEWSITE-CHANGEME: Update to the remaining range after excluding the 10
- # 10 reserved IPs.
- - type: static
- start: 10.23.24.11
- end: 10.23.24.21
-...
----
-schema: 'drydock/Network/v1'
-metadata:
- schema: 'metadata/Document/v1'
- name: calico
- layeringDefinition:
- abstract: false
- layer: site
- storagePolicy: cleartext
-data:
- # NEWSITE-CHANGEME: Set the VLAN ID which the calico network is on
- vlan: '22'
- mtu: 9100
- # NEWSITE-CHANGEME: Set the CIDR for the calico network
- # NOTE: The CIDR minimum size = number of nodes + 10
- cidr: 10.23.22.0/24
- ranges:
- # NEWSITE-CHANGEME: Update to the first 10 IPs in the CIDR
- - type: reserved
- start: 10.23.22.1
- end: 10.23.22.10
- # NEWSITE-CHANGEME: Update to the remaining range after excluding the 10
- # 10 reserved IPs.
- - type: static
- start: 10.23.22.11
- end: 10.23.22.21
-...
Code Review / yaml_builds.git / blobdiff