Moving dev branch code to master branch

[yaml_builds.git] / tools / j2 / serverrc.j2

diff --git a/tools/j2/serverrc.j2 b/tools/j2/serverrc.j2
new file mode 100644 (file)
index 0000000..873442a
--- /dev/null
+++ b/tools/j2/serverrc.j2
@@ -0,0 +1,91 @@
+##############################################################################
+# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.        #
+#                                                                            #
+# Licensed under the Apache License, Version 2.0 (the "License"); you may    #
+# not use this file except in compliance with the License.                   #
+#                                                                            #
+# You may obtain a copy of the License at                                    #
+#       http://www.apache.org/licenses/LICENSE-2.0                           #
+#                                                                            #
+# Unless required by applicable law or agreed to in writing, software        #
+# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT  #
+# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.           #
+# See the License for the specific language governing permissions and        #
+# limitations under the License.                                             #
+##############################################################################
+
+# Add proxy settings if required for your environment
+# export http_proxy=http://your.proxy.com:8080/
+# export https_proxy=http://your.proxy.com:8080/
+#
+
+# host name for server
+SRV_NAME={{yaml.genesis.name}}
+
+# server oem - Dell or HPE (case sensitive)
+SRV_OEM={{yaml.genesis.oem}}
+
+# out of band interface information for server (idrac/ilo/etc)
+SRV_OOB_IP={{yaml.genesis.oob}}
+SRV_OOB_USR={{yaml.ipmi_admin.username}}
+SRV_OOB_PWD={{yaml.ipmi_admin.password}}
+
+# mac address of server to be used during the build - not required for Dell servers
+SRV_MAC={{yaml.genesis.mac_address}}
+
+# name of network interface used during build when ipxe.efi is booted and when os is booted
+# ipxe numbers ports from 0-n in pci bus order.
+# the netx value will depend on how many nics are in the server
+# and which pci device number is assigned to the slot
+SRV_IPXE_INF={{yaml.networks.pxe.inf}}
+
+# the build interface is the nic used by the Ubuntu installed to load the OS
+SRV_BLD_INF={{yaml.networks.slaves[0].name}}
+
+# the boot device is the device name on which the OS will be loaded
+SRV_BOOT_DEVICE={{yaml.disks[0].name}}
+SRV_CEPH_DEVICE={{yaml.disks[1].name}}
+
+# ipxe script to use - based on the os version and kernel to install
+# valid options are script-hwe-16.04.4-amd64.ipxe or script-16.04.4-amd64.ipxe
+SRV_BLD_SCRIPT=script-hwe-16.04.5-amd64.ipxe
+
+# template xml file to set bios and raid configuration settings
+SRV_BIOS_TEMPLATE={{yaml.genesis.bios_template}}
+SRV_BOOT_TEMPLATE={{yaml.genesis.boot_template}}
+SRV_HTTP_BOOT_DEV={{yaml.genesis.http_boot_device}}
+
+# tempalte to run to configure OS after first boot
+# current options are: firstboot.sh.template, firstboot-genesis.sh.tempate or firstboot-airship-iab.sh.template
+SRV_FIRSTBOOT_TEMPLATE=firstboot-genesis.sh.template
+
+# VLAN to use during build and for final network configuration
+SRV_VLAN={{yaml.networks.host.vlan}}
+SRV_STORAGE_VLAN={{yaml.networks.storage.vlan}}
+SRV_CALICO_VLAN={{yaml.networks.ksn.vlan}}
+SRV_NEUTRON_VLAN={{yaml.networks.neutron.vlan}}
+SRV_PXE_INF={{yaml.networks.pxe.interface}}
+
+# basic network information for dhcp config and final server network settings
+SRV_MTU=9000
+SRV_IP={{yaml.genesis.host}}
+SRV_STORAGE_IP={{yaml.genesis.storage}}
+SRV_CALICO_IP={{yaml.genesis.ksn}}
+SRV_NEUTRON_IP={{yaml.genesis.neutron}}
+SRV_PXE_IP={{yaml.genesis.pxe}}
+SRV_SUBNET={{yaml.networks.host.subnet}}
+SRV_NETMASK={{yaml.networks.host.netmask}}
+SRV_GATEWAY={{yaml.networks.host.routes.gateway}}
+SRV_DNS="{{yaml.networks.host.dns.servers}}"
+SRV_DOMAIN={{yaml.networks.host.dns.domain}}
+SRV_DNSSEARCH={{yaml.networks.host.dns.domain}}
+SRV_NTP=ntp.ubuntu.org
+
+# root password for server being built
+SRV_PWD={{yaml.genesis.root_password}}
+
+# network bond information
+SRV_BOND={{yaml.networks.primary}}
+{% for slave in yaml.networks.slaves %}
+SRV_SLAVE{{loop.index}}={{slave.name}}
+{% endfor %}