X-Git-Url: https://gerrit.akraino.org/r/gitweb?a=blobdiff_plain;f=README.md;h=0a0199bf806410c597705ce472383f55d5de64d5;hb=7093adf2ba2a694de7f1435d87c4de8ae1f2fa28;hp=72d059e6ec281dfa9c2aa341bdb2de1eb5580ace;hpb=c2a3c121bf8dfd4f06970472fbafe9dae7233260;p=icn.git
diff --git a/README.md b/README.md
index 72d059e..0a0199b 100644
--- a/README.md
+++ b/README.md
@@ -1,573 +1,34 @@
-# Introduction
-ICN strives to automate the process of installing the local cluster
-controller to the greatest degree possible â "zero touch
-installation". Once the jump server (Local Controller) is booted and
-the compute cluster-specific values are provided, the controller
-begins to inspect and provision the bare metal servers until the
-cluster is entirely configured. This document shows step-by-step how
-to configure the network and deployment architecture for the ICN
-blueprint.
-
-# License
-Apache license v2.0
-
-# Deployment Architecture
-The Local Controller is provisioned with the Cluster API controllers
-and the Metal3 infrastructure provider, which enable provisioning of
-bare metal servers. The controller has three network connections to
-the bare metal servers: network A connects bare metal servers, network
-B is a private network used for provisioning the bare metal servers
-and network C is the IPMI network, used for control during
-provisioning. In addition, the bare metal servers connect to the
-network D, the SRIOV network.
-
-![Figure 1](figure-1.png)*Figure 1: Deployment Architecture*
-
-- Net A -- Bare metal network, lab networking for ssh. It is used as
- the control plane for K8s, used by OVN and Flannel for the overlay
- networking.
-- Net B (internal network) -- Provisioning network used by Ironic to
- do inspection.
-- Net C (internal network) -- IPMI LAN to do IPMI protocol for the OS
- provisioning. The NICs support IPMI. The IP address should be
- statically assigned via the IPMI tool or other means.
-- Net D (internal network) -- Data plane network for the Akraino
- application. Using the SR-IOV networking and fiber cables. Intel
- 25GB and 40GB FLV NICs.
-
-In some deployment models, you can combine Net C and Net A to be the
-same networks, but the developer should take care of IP address
-management between Net A and IPMI address of the server.
-
-Also note that the IPMI NIC may share the same RJ-45 jack with another
-one of the NICs.
-
-# Pre-installation Requirements
-There are two main components in ICN Infra Local Controller - Local
-Controller and K8s compute cluster.
-
-### Local Controller
-The Local Controller will reside in the jump server to run the Cluster
-API controllers with the Kubeadm bootstrap provider and Metal3
-infrastructure provider.
-
-### K8s Compute Cluster
-The K8s compute cluster will actually run the workloads and is
-installed on bare metal servers.
-
-## Hardware Requirements
-
-### Minimum Hardware Requirement
-All-in-one VM based deployment requires servers with at least 32 GB
-RAM and 32 CPUs.
-
-### Recommended Hardware Requirements
-Recommended hardware requirements are servers with 64GB Memory, 32
-CPUs and SRIOV network cards.
-
-## Software Prerequisites
-The jump server is required to be pre-installed with Ubuntu 18.04.
-
-## Database Prerequisites
-No prerequisites for ICN blueprint.
-
-## Other Installation Requirements
-
-### Jump Server Requirements
-
-#### Jump Server Hardware Requirements
-- Local Controller: at least three network interfaces.
-- Bare metal servers: four network interfaces, including one IPMI interface.
-- Four or more hubs, with cabling, to connect four networks.
-
-(Tested as below)
-Hostname | CPU Model | Memory | Storage | 1GbE: NIC#, VLAN, (Connected extreme 480 switch) | 10GbE: NIC# VLAN, Network (Connected with IZ1 switch)
----------|-----------|--------|---------|--------------------------------------------------|------------------------------------------------------
-jump0 | Intel 2xE5-2699 | 64GB | 3TB (Sata)
180 (SSD) | eth0: VLAN 110
eno1: VLAN 110
eno2: VLAN 111 |
-
-#### Jump Server Software Requirements
-ICN supports Ubuntu 18.04. The ICN blueprint installs all required
-software during `make jump_server`.
-
-### Network Requirements
-Please refer to figure 1 for all the network requirements of the ICN
-blueprint.
-
-Please make sure you have 3 distinguished networks - Net A, Net B and
-Net C as mentioned in figure 1. Local Controller uses the Net B and
-Net C to provision the bare metal servers to do the OS provisioning.
-
-### Bare Metal Server Requirements
-
-### K8s Compute Cluster
-
-#### Compute Server Hardware Requirements
-(Tested as below)
-Hostname | CPU Model | Memory | Storage | 1GbE: NIC#, VLAN, (Connected extreme 480 switch) | 10GbE: NIC# VLAN, Network (Connected with IZ1 switch)
----------|-----------|--------|---------|--------------------------------------------------|------------------------------------------------------
-node1 | Intel 2xE5-2699 | 64GB | 3TB (Sata)
180 (SSD) | eth0: VLAN 110
eno1: VLAN 110
eno2: VLAN 111 | eno3: VLAN 113
-node2 | Intel 2xE5-2699 | 64GB | 3TB (Sata)
180 (SSD) | eth0: VLAN 110
eno1: VLAN 110
eno2: VLAN 111 | eno3: VLAN 113
-node3 | Intel 2xE5-2699 | 64GB | 3TB (Sata)
180 (SSD) | eth0: VLAN 110
eno1: VLAN 110
eno2: VLAN 111 | eno3: VLAN 113
-
-#### Compute Server Software Requirements
-The Local Controller will install all the software in compute servers
-from the OS to the software required to bring up the K8s cluster.
-
-### Execution Requirements (Bare Metal Only)
-The ICN blueprint checks all the precondition and execution
-requirements for bare metal.
-
-# Installation High-Level Overview
-Installation is two-step process:
-- Installation of the Local Controller.
-- Installation of a compute cluster.
-
-## Bare Metal Deployment Guide
-
-### Install Bare Metal Jump Server
-
-#### Creating the Settings Files
-
-##### Local Controller Network Configuration Reference
-The user will find the network configuration file named as
-"user_config.sh" in the ICN parent directory.
-
-`user_config.sh`
-``` shell
-#!/bin/bash
-
-#Ironic Metal3 settings for provisioning network (Net B)
-export IRONIC_INTERFACE="eno2"
-
-#Ironic Metal3 setting for IPMI LAN Network (Net C)
-export IRONIC_IPMI_INTERFACE="eno1"
-```
-
-#### Running
-After configuring the network configuration file, please run `make
-jump_server` from the ICN parent directory as shown below:
-
-``` shell
-root@jump0:# git clone "https://gerrit.akraino.org/r/icn"
-Cloning into 'icn'...
-remote: Counting objects: 69, done
-remote: Finding sources: 100% (69/69)
-remote: Total 4248 (delta 13), reused 4221 (delta 13)
-Receiving objects: 100% (4248/4248), 7.74 MiB | 21.84 MiB/s, done.
-Resolving deltas: 100% (1078/1078), done.
-root@jump0:# cd icn/
-root@jump0:# make jump_server
-```
-
-The following steps occurs once the `make jump_server` command is
-given.
-1. All the software required to run the bootstrap cluster is
- downloaded and installed.
-2. K8s cluster to maintain the bootstrap cluster and all the servers
- in the edge location is installed.
-3. Metal3 specific network configuration such as local DHCP server
- networking for each edge location, Ironic networking for both
- provisioning network and IPMI LAN network are identified and
- created.
-4. The Cluster API controllers, bootstrap, and infrastructure
- providers and configured and installed.
-5. The Flux controllers are installed.
-
-#### Creating a compute cluster
-A compute cluster is composed of installations of two types of Helm
-charts: machine and cluster. The specific installations of these Helm
-charts are defined in HelmRelease resources consumed by the Flux
-controllers in the jump server. The user is required to provide the
-machine and cluster specific values in the HelmRelease resources.
-
-##### Preconfiguration for the compute cluster in Jump Server
-The user is required to provide the IPMI information of the servers
-and the values of the compute cluster they connect to the Local
-Controller.
-
-If the baremetal network provides a DHCP server with gateway and DNS
-server information, and each server has identical hardware then a
-cluster template can be used. Otherwise these values must also be
-provided with the values for each server. Refer to the machine chart
-in icn/deploy/machine for more details. In the example below, no DHCP
-server is present in the baremetal network.
-
-`site.yaml`
-``` yaml
-apiVersion: v1
-kind: Namespace
-metadata:
- name: metal3
----
-apiVersion: source.toolkit.fluxcd.io/v1beta1
-kind: GitRepository
-metadata:
- name: icn
- namespace: metal3
-spec:
- gitImplementation: go-git
- interval: 1m0s
- ref:
- branch: master
- timeout: 20s
- url: https://gerrit.akraino.org/r/icn
----
-apiVersion: helm.toolkit.fluxcd.io/v2beta1
-kind: HelmRelease
-metadata:
- name: machine-node1
- namespace: metal3
-spec:
- interval: 5m
- chart:
- spec:
- chart: deploy/machine
- sourceRef:
- kind: GitRepository
- name: icn
- interval: 1m
- values:
- machineName: node1
- machineLabels:
- machine: node1
- bmcAddress: ipmi://10.10.110.11
- bmcUsername: admin
- bmcPassword: password
- networks:
- baremetal:
- macAddress: 00:1e:67:fe:f4:19
- type: ipv4
- ipAddress: 10.10.110.21/24
- gateway: 10.10.110.1
- nameservers: ["8.8.8.8"]
- provisioning:
- macAddress: 00:1e:67:fe:f4:1a
- type: ipv4_dhcp
- sriov:
- macAddress: 00:1e:67:f8:6a:41
- type: ipv4
- ipAddress: 10.10.113.3/24
----
-apiVersion: helm.toolkit.fluxcd.io/v2beta1
-kind: HelmRelease
-metadata:
- name: machine-node2
- namespace: metal3
-spec:
- interval: 5m
- chart:
- spec:
- chart: deploy/machine
- sourceRef:
- kind: GitRepository
- name: icn
- interval: 1m
- values:
- machineName: node2
- machineLabels:
- machine: node2
- bmcAddress: ipmi://10.10.110.12
- bmcUsername: admin
- bmcPassword: password
- networks:
- baremetal:
- macAddress: 00:1e:67:f1:5b:90
- type: ipv4
- ipAddress: 10.10.110.22/24
- gateway: 10.10.110.1
- nameservers: ["8.8.8.8"]
- provisioning:
- macAddress: 00:1e:67:f1:5b:91
- type: ipv4_dhcp
- sriov:
- macAddress: 00:1e:67:f8:69:81
- type: ipv4
- ipAddress: 10.10.113.4/24
----
-apiVersion: helm.toolkit.fluxcd.io/v2beta1
-kind: HelmRelease
-metadata:
- name: cluster-compute
- namespace: metal3
-spec:
- interval: 5m
- chart:
- spec:
- chart: deploy/cluster
- sourceRef:
- kind: GitRepository
- name: icn
- interval: 1m
- values:
- clusterName: compute
- controlPlaneEndpoint: 10.10.110.21
- controlPlaneHostSelector:
- matchLabels:
- machine: node1
- workersHostSelector:
- matchLabels:
- machine: node2
- userData:
- hashedPassword: $6$rounds=10000$PJLOBdyTv23pNp$9RpaAOcibbXUMvgJScKK2JRQioXW4XAVFMRKqgCB5jC4QmtAdbA70DU2jTcpAd6pRdEZIaWFjLCNQMBmiiL40.
- sshAuthorizedKey: ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCrxu+fSrU51vgAO5zP5xWcTU8uLv4MkUZptE2m1BJE88JdQ80kz9DmUmq2AniMkVTy4pNeUW5PsmGJa+anN3MPM99CR9I37zRqy5i6rUDQgKjz8W12RauyeRMIBrbdy7AX1xasoTRnd6Ta47bP0egiFb+vUGnlTFhgfrbYfjbkJhVfVLCTgRw8Yj0NSK16YEyhYLbLXpix5udRpXSiFYIyAEWRCCsWJWljACr99P7EF82vCGI0UDGCCd/1upbUwZeTouD/FJBw9qppe6/1eaqRp7D36UYe3KzLpfHQNgm9AzwgYYZrD4tNN6QBMq/VUIuam0G1aLgG8IYRLs41HYkJ root@jump0
- flux:
- url: https://gerrit.akraino.org/r/icn
- branch: master
- path: ./deploy/site/cluster-e2etest
-```
-
-A brief overview of the values is below. Refer to the machine and
-cluster charts in deploy/machine and deploy/cluster respectively for
-more details.
-
-- *machineName*: This will be the hostname for the machine, once it is
- provisioned by Metal3.
-- *bmcUsername*: BMC username required to be provided for Ironic.
-- *bmcPassword*: BMC password required to be provided for Ironic.
-- *bmcAddress*: BMC server IPMI LAN IP address.
-- *networks*: A dictionary of the networks used by ICN. For more
- information, refer to the *networkData* field of the BareMetalHost
- resource definition.
- - *macAddress*: The MAC address of the interface.
- - *type*: The type of network, either dynamic ("ipv4_dhcp") or
- static ("ipv4").
- - *ipAddress*: Only valid for type "ipv4"; the IP address of the
- interface.
- - *gateway*: Only valid for type "ipv4"; the gateway of this
- network.
- - *nameservers*: Only valid for type "ipv4"; an array of DNS
- servers.
-- *clusterName*: The name of the cluster.
-- *controlPlaneEndpoint*: The K8s control plane endpoint. This works
- in cooperation with the *controlPlaneHostSelector* to ensure that it
- addresses the control plane node.
-- *controlPlaneHostSelector*: A K8s match expression against labels on
- the *BareMetalHost* machine resource (from the *machineLabels* value
- of the machine Helm chart). This will be used by Cluster API to
- select machines for the control plane.
-- *workersHostSelector*: A K8s match expression selecting worker
- machines.
-- *userData*: User data values to be provisioned into each machine in
- the cluster.
- - *hashedPassword*: The hashed password of the default user on each
- machine.
- - *sshAuthorizedKey*: An authorized public key of the *root* user on
- each machine.
-- *flux*: An optional repository to continuously reconcile the created
- K8s cluster against.
-
-#### Running
-After configuring the machine and cluster site values, the next steps
-are to encrypt the secrets contained in the file, commit the file to
-source control, and create the Flux resources on the jump server
-pointing to the committed files.
+> NOTE: The ICN project is presently in the incubation/pre-production
+> phase and is suitable for testing purposes only.
-1. Create a key protect the secrets in the values if one does not
- already exist. The key created below will be named "site-secrets".
-
-``` shell
-root@jump0:# ./deploy/site/site.sh create-gpg-key site-secrets
-```
-
-2. Encrypt the secrets in the site values.
-
-``` shell
-root@jump0:# ./deploy/site/site.sh sops-encrypt-site site.yaml site-secrets
-```
-
-3. Commit the site.yaml and additional files (sops.pub.asc,
- .sops.yaml) created by sops-encrypt-site to a Git repository. For
- the purposes of the next step, site.yaml will be committed to a Git
- repository hosted at URL, on the specified BRANCH, and at location
- PATH inside the source tree.
-
-4. Create the Flux resources to deploy the resources described by the
- repository in step 3. This creates a GitRepository resource
- containing the URL and BRANCH to synchronize, a Secret resource
- containing the private key used to decrypt the secrets in the site
- values, and a Kustomization resource with the PATH to the site.yaml
- file at the GitRepository.
-
-```shell
-root@jump0:# ./deploy/site/site.sh flux-create-site URL BRANCH PATH site-secrets
-```
-
-The progress of the deployment may be monitored in a number of ways:
-
-``` shell
-root@jump0:# kubectl -n metal3 get baremetalhost
-root@jump0:# kubectl -n metal3 get cluster compute
-root@jump0:# clusterctl -n metal3 describe cluster compute
-```
-
-When the control plane is ready, the kubeconfig can be obtained with
-clusterctl and used to access the compute cluster:
-
-``` shell
-root@jump0:# clusterctl -n metal3 get kubeconfig compute >compute-admin.conf
-root@jump0:# kubectl --kubeconfig=compute-admin.conf cluster-info
-```
-
-## Virtual Deployment Guide
-
-### Standard Deployment Overview
-![Figure 2](figure-2.png)*Figure 2: Virtual Deployment Architecture*
-
-Virtual deployment is used for the development environment using
-Vagrant to create VMs with PXE boot. No setting is required from the
-user to deploy the virtual deployment.
-
-### Snapshot Deployment Overview
-No snapshot is implemented in ICN R6.
-
-### Special Requirements for Virtual Deployment
-
-#### Install Jump Server
-Jump server is required to be installed with Ubuntu 18.04. This will
-install all the VMs and install the K8s clusters.
-
-#### Verifying the Setup - VMs
-To verify the virtual deployment, execute the following commands:
-``` shell
-$ vagrant up --no-parallel
-$ vagrant ssh jump
-vagrant@jump:~$ sudo su
-root@jump:/home/vagrant# cd /icn
-root@jump:/icn# make jump_server
-root@jump:/icn# make vm_cluster
-```
-`vagrant up --no-parallel` creates three VMs: vm-jump, vm-machine-1,
-and vm-machine-2, each with 16GB RAM and 8 vCPUs. `make jump_server`
-installs the jump server components into vm-jump, and `make
-vm_cluster` installs a K8s cluster on the vm-machine VMs using Cluster
-API. The cluster is configured to use Flux to bring up the cluster
-with all addons and plugins.
-
-# Verifying the Setup
-ICN blueprint checks all the setup in both bare metal and VM
-deployment. Verify script will first confirm that the cluster control
-plane is ready then run self tests of all addons and plugins.
-
-**Bare Metal Verifier**: Run the `make bm_verifer`, it will verify the
-bare-metal deployment.
-
-**Verifier**: Run the `make vm_verifier`, it will verify the virtual
-deployment.
-
-# Developer Guide and Troubleshooting
-For development uses the virtual deployment, it take up to 10 mins to
-bring up the virtual BMC VMs with PXE boot.
-
-## Utilization of Images
-No images provided in this ICN release.
-
-## Post-deployment Configuration
-No post-deployment configuration required in this ICN release.
-
-## Debugging Failures
-* For first time installation enable KVM console in the trial or lab
- servers using Raritan console or use Intel web BMC console.
-
- ![Figure 3](figure-3.png)
-* Deprovision state will result in Ironic agent sleeping before next
- heartbeat - it is not an error. It results in bare metal server
- without OS and installed with ramdisk.
-* Deprovision in Metal3 is not straight forward - Metal3 follows
- various stages from provisioned, deprovisioning and ready. ICN
- blueprint take care navigating the deprovisioning states and
- removing the BareMetalHost (BMH) custom resouce in case of cleaning.
-* Manual BMH cleaning of BMH or force cleaning of BMH resource result
- in hang state - use `make bmh_clean` to remove the BMH state.
-* Logs of Ironic, openstack baremetal command to see the state of the
- server.
-* Logs of baremetal operator gives failure related to images or images
- md5sum errors.
-* It is not possible to change the state from provision to deprovision
- or deprovision to provision without completing that state. All the
- issues are handled in ICN scripts.
-
-## Reporting a Bug
-Required Linux Foundation ID to launch bug in ICN:
-https://jira.akraino.org/projects/ICN/issues
-
-# Uninstall Guide
-
-## Bare Metal deployment
-The command `make clean_all` uninstalls all the components installed by
-`make install`
-* It de-provision all the servers provisioned and removes them from
- Ironic database.
-* Baremetal operator is deleted followed by Ironic database and
- container.
-* Network configuration such internal DHCP server, provisioning
- interfaces and IPMI LAN interfaces are deleted.
-* It will reset the bootstrap cluster - K8s cluster is torn down in
- the jump server and all the associated docker images are removed.
-* All software packages installed by `make jump_server` are removed,
- such as Ironic, openstack utility tool, docker packages and basic
- prerequisite packages.
-
-## Virtual deployment
-The command `vagrant destroy -f` uninstalls all the components for the
-virtual deployments.
-
-# Troubleshooting
-
-## Error Message Guide
-The error message is explicit, all messages are captured in log
-directory.
-
-# Maintenance
-
-## Blueprint Package Maintenance
-No packages are maintained in ICN.
-
-## Software maintenance
-Not applicable.
-
-## Hardware maintenance
-Not applicable.
-
-## BluePrint Deployment Maintenance
-Not applicable.
-
-# Frequently Asked Questions
-**How to setup IPMI?**
-
-First, make sure the IPMI tool is installed in your servers, if not
-install them using `apt install ipmitool`. Then, check for the
-ipmitool information of each servers using the command `ipmitool lan
-print 1`. If the above command doesn't show the IPMI information, then
-setup the IPMI static IP address using the following instructions:
-- Mostl easy way to set up IPMI topology in your lab setup is by
- using IPMI tool.
-- Using IPMI tool -
- https://www.thomas-krenn.com/en/wiki/Configuring_IPMI_under_Linux_using_ipmitool
-- IPMI information can be considered during the BIOS setting as well.
-
-**BMC web console URL is not working?**
-
-It is hard to find issues or reason. Check the ipmitool bmc info to
-find the issues, if the URL is not available.
+# Introduction
-**No change in BMH state - provisioning state is for more than 40min?**
+ICN addresses the infrastructure orchestration needed to bring up a
+site using baremetal servers. It strives to automate the process of
+installing a jump server (Local Controller) to the greatest degree
+possible â "zero touch installation". Once the jump server is booted
+and the compute cluster-specific values are provided, the controller
+begins to inspect and provision the baremetal servers until the
+cluster is entirely configured.
-Generally, Metal3 provision for bare metal takes 20 - 30 mins. Look at
-the Ironic logs and baremetal operator to look at the state of
-servers. Openstack baremetal node shows all state of the server right
-from power, storage.
+# Table of Contents
+1. [Quick start](doc/quick-start.md)
+2. [Installation guide](doc/installation-guide.md)
+3. [Troubleshooting](doc/troubleshooting.md)
+4. [Software BOM](doc/software-bom.md)
-**Why provider network (baremetal network configuration) is required?**
+# Reporting a bug
-Generally, provider network DHCP servers in a lab provide the router
-and DNS server details. In some labs, there is no DHCP server or the
-DHCP server does not provide this information.
+Please report any issues found in the [ICN
+JIRA](https://jira.akraino.org/projects/ICN/issues). A Linux
+Foundation ID must be created first.
# License
+Apache license v2.0
```
/*
-* Copyright 2019 Intel Corporation, Inc
+* Copyright 2019-2022 Intel Corporation, Inc
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
@@ -582,7 +43,3 @@ DHCP server does not provide this information.
* limitations under the License.
*/
```
-
-# References
-
-# Definitions, acronyms and abbreviations