X-Git-Url: https://gerrit.akraino.org/r/gitweb?a=blobdiff_plain;f=README.md;h=a1789952aa9a1807dc1ce810696e0e4bcc38d713;hb=d77a20e30b36241736d9694eb79d9d838fc62ca8;hp=b833ff393d626875c1705a9c1bb397307fd94766;hpb=31a860f56b53eb51a7dc4189e6959a004733115e;p=icn.git
diff --git a/README.md b/README.md
index b833ff3..a178995 100644
--- a/README.md
+++ b/README.md
@@ -82,7 +82,7 @@ No prerequisites for ICN blueprint.
(Tested as below)
Hostname | CPU Model | Memory | Storage | 1GbE: NIC#, VLAN, (Connected extreme 480 switch) | 10GbE: NIC# VLAN, Network (Connected with IZ1 switch)
---------|-----------|--------|---------|--------------------------------------------------|------------------------------------------------------
-jump0 | Intel 2xE5-2699 | 64GB | 3TB (Sata)
180 (SSD) | eth0: VLAN 110
eno1: VLAN 110
eno2: VLAN 111 | eno3: VLAN 112
+jump0 | Intel 2xE5-2699 | 64GB | 3TB (Sata)
180 (SSD) | eth0: VLAN 110
eno1: VLAN 110
eno2: VLAN 111 |
#### Jump Server Software Requirements
ICN supports Ubuntu 18.04. The ICN blueprint installs all required
@@ -104,9 +104,9 @@ Net C to provision the bare metal servers to do the OS provisioning.
(Tested as below)
Hostname | CPU Model | Memory | Storage | 1GbE: NIC#, VLAN, (Connected extreme 480 switch) | 10GbE: NIC# VLAN, Network (Connected with IZ1 switch)
---------|-----------|--------|---------|--------------------------------------------------|------------------------------------------------------
-node1 | Intel 2xE5-2699 | 64GB | 3TB (Sata)
180 (SSD) | eth0: VLAN 110
eno1: VLAN 110
eno2: VLAN 111 | eno3: VLAN 112
eno4: VLAN 113
-node2 | Intel 2xE5-2699 | 64GB | 3TB (Sata)
180 (SSD) | eth0: VLAN 110
eno1: VLAN 110
eno2: VLAN 111 | eno3: VLAN 112
eno4: VLAN 113
-node3 | Intel 2xE5-2699 | 64GB | 3TB (Sata)
180 (SSD) | eth0: VLAN 110
eno1: VLAN 110
eno2: VLAN 111 | eno3: VLAN 112
eno4: VLAN 113
+node1 | Intel 2xE5-2699 | 64GB | 3TB (Sata)
180 (SSD) | eth0: VLAN 110
eno1: VLAN 110
eno2: VLAN 111 | eno3: VLAN 113
+node2 | Intel 2xE5-2699 | 64GB | 3TB (Sata)
180 (SSD) | eth0: VLAN 110
eno1: VLAN 110
eno2: VLAN 111 | eno3: VLAN 113
+node3 | Intel 2xE5-2699 | 64GB | 3TB (Sata)
180 (SSD) | eth0: VLAN 110
eno1: VLAN 110
eno2: VLAN 111 | eno3: VLAN 113
#### Compute Server Software Requirements
The Local Controller will install all the software in compute servers
@@ -136,7 +136,7 @@ below. This example only shows 2 servers, statically configured on the
baremetal network. If you want to increase servers, just add another
array. If the baremetal network provides a DHCP server with gateway
and DNS server information, just change the baremetal type to "ipv4".
-ICN provides DHCP servers for the provisioning and bootstrap networks.
+ICN provides DHCP servers for the provisioning network.
`node.json.sample`
``` json
@@ -166,8 +166,8 @@ ICN provides DHCP servers for the provisioning and bootstrap networks.
"type": "phy"
},
{
- "id": "bootstrap_nic",
- "ethernet_mac_address": "00:1e:67:f8:6a:40",
+ "id": "sriov_nic",
+ "ethernet_mac_address": "00:1e:67:f8:6a:41",
"type": "phy"
}
],
@@ -186,9 +186,10 @@ ICN provides DHCP servers for the provisioning and bootstrap networks.
"type": "ipv4_dhcp"
},
{
- "id": "bootstrap",
- "link": "bootstrap_nic",
- "type": "ipv4_dhcp"
+ "id": "sriov",
+ "link": "sriov_nic",
+ "type": "ipv4",
+ "ip_address": "10.10.113.2/24"
}
],
"services": []
@@ -214,13 +215,13 @@ ICN provides DHCP servers for the provisioning and bootstrap networks.
"type": "phy"
},
{
- "id": "bootstrap_nic",
- "ethernet_mac_address": "00:1e:67:f8:69:80",
+ "id": "provisioning_nic",
+ "ethernet_mac_address": "00:1e:67:f1:5b:91",
"type": "phy"
},
{
- "id": "provisioning_nic",
- "ethernet_mac_address": "00:1e:67:f1:5b:91",
+ "id": "sriov_nic",
+ "ethernet_mac_address": "00:1e:67:f8:69:81",
"type": "phy"
}
],
@@ -239,9 +240,10 @@ ICN provides DHCP servers for the provisioning and bootstrap networks.
"type": "ipv4_dhcp"
},
{
- "id": "bootstrap",
- "link": "bootstrap_nic",
- "type": "ipv4_dhcp"
+ "id": "sriov",
+ "link": "sriov_nic",
+ "type": "ipv4",
+ "ip_address": "10.10.113.3/24"
}
],
"services": []
@@ -298,13 +300,6 @@ The user will find the network configuration file named as
``` shell
#!/bin/bash
-#Local Controller - Bootstrap cluster DHCP connection
-#BS_DHCP_INTERFACE defines the interfaces, to which ICN DHCP deployment will bind
-export BS_DHCP_INTERFACE="eno3"
-
-#BS_DHCP_INTERFACE_IP defines the IPAM for the ICN DHCP to be managed.
-export BS_DHCP_INTERFACE_IP="172.31.1.1/24"
-
#Edge Location Provider Network configuration
#Net A - Provider Network
#If provider having specific Gateway and DNS server details in the edge location,
@@ -401,8 +396,7 @@ No snapshot is implemented in ICN R2.
#### Install Jump Server
Jump server is required to be installed with Ubuntu 18.04. This will
-install all the VMs and install the k8s clusters. Same as bare metal
-deployment, use `make vm_install` to install virtual deployment.
+install all the VMs and install the k8s clusters.
#### Verifying the Setup - VMs
`make verify_all` installs two VMs with name master-0 and worker-0