X-Git-Url: https://gerrit.akraino.org/r/gitweb?a=blobdiff_plain;f=site_type%2Fovsdpdk%2Fairship-treasuremap%2Fsite%2Fairship-seaworthy%2Fbaremetal%2Fnodes.yaml;fp=site_type%2Fovsdpdk%2Fairship-treasuremap%2Fsite%2Fairship-seaworthy%2Fbaremetal%2Fnodes.yaml;h=ee88a16a83320529fbdf32c8d7af80fd0c887c08;hb=fe885c06b13b6807209a76d0226a40d84ec61df3;hp=0000000000000000000000000000000000000000;hpb=f75a047e5d98eea7d43cfbe6ade55ce2e2e0f3a9;p=yaml_builds.git diff --git a/site_type/ovsdpdk/airship-treasuremap/site/airship-seaworthy/baremetal/nodes.yaml b/site_type/ovsdpdk/airship-treasuremap/site/airship-seaworthy/baremetal/nodes.yaml new file mode 100644 index 0000000..ee88a16 --- /dev/null +++ b/site_type/ovsdpdk/airship-treasuremap/site/airship-seaworthy/baremetal/nodes.yaml @@ -0,0 +1,254 @@ +--- +# Drydock BaremetalNode resources for a specific rack are stored in this file. +# +# NOTE: For new sites, you should complete the networks/physical/networks.yaml +# file before working on this file. +# +# In this file, you should make the number of `drydock/BaremetalNode/v1` +# resources equal the number of bare metal nodes you have, either by deleting +# excess BaremetalNode definitions (if there are too many), or by copying and +# pasting the last BaremetalNode in the file until you have the correct number +# of baremetal nodes (if there are too few). +# +# Then in each file, address all additional NEWSITE-CHANGEME markers to update +# the data in these files with the right values for your new site. +# +# *NOTE: The Genesis node is counted as one of the control plane nodes. Note +# that the Genesis node does not appear on this bare metal list, because the +# procedure to reprovision the Genesis host with MaaS has not yet been +# implemented. Therefore there will be only three bare metal nodes in this file +# with the 'masters' tag, as the genesis roles are assigned in a difference +# place (profiles/genesis.yaml). +# NOTE: The host profiles for the control plane are further divided into two +# variants: primary and secondary. The only significance this has is that the +# "primary" nodes are active Ceph nodes, whereas the "secondary" nodes are Ceph +# standby nodes. For Ceph quorum, this means that the control plane split will +# be 3 primary + 1 standby host profile, and the Genesis node counts toward one +# of the 3 primary profiles. Other control plane services are not affected by +# primary vs secondary designation. +# +# TODO: Include the hostname naming convention +# +schema: 'drydock/BaremetalNode/v1' +metadata: + schema: 'metadata/Document/v1' + # NEWSITE-CHANGEME: Replace with the hostname of the first node in the rack, + # after (excluding) genesis. + name: cab23-r720-12 + layeringDefinition: + abstract: false + layer: site + storagePolicy: cleartext +data: + # NEWSITE-CHANGEME: The IPv4 address assigned to each logical network on this + # node. In the reference Airship deployment, this is all logical Networks defined + # in networks/physical/networks.yaml. IP addresses are manually assigned, by-hand. + # (what could possibly go wrong!) The instructions differ for each logical + # network, which are laid out below. + addressing: + # The iDrac/iLo IP of the node. It's important that this match up with the + # node's hostname above, so that the rack number and node position encoded + # in the hostname are accurate and matching the node that IPMI operations + # will be performed against (for poweron, poweroff, PXE boot to wipe disk or + # reconfigure identity, etc - very important to get right for these reasons). + # These addresses should already be assigned to nodes racked and stacked in + # the environment; these are not addresses which MaaS assigns. + - network: oob + address: 10.23.104.12 + # The IP of the node on the PXE network. Refer to the static IP range + # defined for the PXE network in networks/physical/networks.yaml. Begin allocating + # IPs from this network, starting with the second IP (inclusive) from the + # allocation range of this subnet (Genesis node will have the first IP). + # Ex: If the start IP for the PXE "static" network is 10.23.20.11, then + # genesis will have 10.23.20.11, this node will have 10.23.20.12, and + # so on with incrementing IP addresses with each additional node. + - network: pxe + address: 10.23.20.12 + # Genesis node gets first IP, all other nodes increment IPs from there + # within the allocation range defined for the network in + # networks/physical/networks.yaml + - network: oam + address: 10.23.21.12 + # Genesis node gets first IP, all other nodes increment IPs from there + # within the allocation range defined for the network in + # networks/physical/networks.yaml + - network: storage + address: 10.23.23.12 + # Genesis node gets first IP, all other nodes increment IPs from there + # within the allocation range defined for the network in + # networks/physical/networks.yaml + - network: overlay + address: 10.23.24.12 + # Genesis node gets first IP, all other nodes increment IPs from there + # within the allocation range defined for the network in + # networks/physical/networks.yaml + - network: calico + address: 10.23.22.12 + # NEWSITE-CHANGEME: Set the host profile for the node. + # Note that there are different host profiles depending if this is a control + # plane vs data plane node, and different profiles that map to different types + # hardware. Control plane host profiles are further broken down into "primary" + # and "secondary" profiles (refer to the Notes section at the top of this doc). + # Select the host profile that matches up to your type of + # hardware and function. E.g., the r720 here refers to Dell R720 hardware, the + # 'cp' refers to a control plane profile, and the "primary" means it will be + # an active member in the ceph quorum. Refer to profiles/host/ for the list + # of available host profiles specific to this site (otherwise, you may find + # a general set of host profiles at the "type" or "global" layers/folders. + # If you have hardware that is not on this list of profiles, you may need to + # create a new host profile for that hardware. + # Regarding control plane vs other data plane profiles, refer to the notes at + # the beginning of this file. There should be one control plane node per rack, + # including Genesis. Note Genesis won't actually be listed in this file as a + # BaremetalNode, but the rest are. + # This is the second "primary" control plane node after Genesis. + host_profile: cp_r720-primary + metadata: + tags: + # NEWSITE-CHANGEME: See previous comment. Apply 'masters' tag for control + # plane node, and 'workers' tag for data plane hosts. + - 'masters' + # NEWSITE-CHANGEME: Refer to site engineering package or other supporting + # documentation for the specific rack name. This should be a rack name that + # is meaningful to data center personnel (i.e. a rack they could locate if + # you gave them this rack designation). + rack: cab23 +... +--- +schema: 'drydock/BaremetalNode/v1' +metadata: + schema: 'metadata/Document/v1' + # NEWSITE-CHANGEME: The next node's hostname + name: cab23-r720-13 + layeringDefinition: + abstract: false + layer: site + storagePolicy: cleartext +data: + # NEWSITE-CHANGEME: The next node's IPv4 addressing + addressing: + - network: oob + address: 10.23.104.13 + - network: pxe + address: 10.23.20.13 + - network: oam + address: 10.23.21.13 + - network: storage + address: 10.23.23.13 + - network: overlay + address: 10.23.24.13 + - network: calico + address: 10.23.22.13 + # NEWSITE-CHANGEME: The next node's host profile + host_profile: cp_r720-primary + metadata: + # NEWSITE-CHANGEME: The next node's rack designation + rack: cab23 + # NEWSITE-CHANGEME: The next node's role desigatnion + tags: + - 'masters' +... +--- +schema: 'drydock/BaremetalNode/v1' +metadata: + schema: 'metadata/Document/v1' + # NEWSITE-CHANGEME: The next node's hostname + name: cab23-r720-14 + layeringDefinition: + abstract: false + layer: site + storagePolicy: cleartext +data: + # NEWSITE-CHANGEME: The next node's IPv4 addressing + addressing: + - network: oob + address: 10.23.104.14 + - network: pxe + address: 10.23.20.14 + - network: oam + address: 10.23.21.14 + - network: storage + address: 10.23.23.14 + - network: overlay + address: 10.23.24.14 + - network: calico + address: 10.23.22.14 + # NEWSITE-CHANGEME: The next node's host profile + # This is the third "primary" control plane profile after genesis + host_profile: cp_r740-secondary + metadata: + # NEWSITE-CHANGEME: The next node's rack designation + rack: cab23 + # NEWSITE-CHANGEME: The next node's role desigatnion + tags: + - 'masters' +... +--- +schema: 'drydock/BaremetalNode/v1' +metadata: + schema: 'metadata/Document/v1' + # NEWSITE-CHANGEME: The next node's hostname + name: cab23-r720-17 + layeringDefinition: + abstract: false + layer: site + storagePolicy: cleartext +data: + # NEWSITE-CHANGEME: The next node's IPv4 addressing + addressing: + - network: oob + address: 10.23.104.17 + - network: pxe + address: 10.23.20.17 + - network: oam + address: 10.23.21.17 + - network: storage + address: 10.23.23.17 + - network: overlay + address: 10.23.24.17 + - network: calico + address: 10.23.22.17 + # NEWSITE-CHANGEME: The next node's host profile + # This is the one and only appearance of the "secondary" control plane profile + host_profile: dp_r720 + metadata: + # NEWSITE-CHANGEME: The next node's rack designation + rack: cab23 + # NEWSITE-CHANGEME: The next node's role desigatnion + tags: + - 'workers' +... +--- +schema: 'drydock/BaremetalNode/v1' +metadata: + schema: 'metadata/Document/v1' + # NEWSITE-CHANGEME: The next node's hostname + name: cab23-r720-19 + layeringDefinition: + abstract: false + layer: site + storagePolicy: cleartext +data: + # NEWSITE-CHANGEME: The next node's IPv4 addressing + addressing: + - network: oob + address: 10.23.104.19 + - network: pxe + address: 10.23.20.19 + - network: oam + address: 10.23.21.19 + - network: storage + address: 10.23.23.19 + - network: overlay + address: 10.23.24.19 + - network: calico + address: 10.23.22.19 + # NEWSITE-CHANGEME: The next node's host profile + host_profile: dp_r720 + metadata: + # NEWSITE-CHANGEME: The next node's rack designation + rack: cab23 + # NEWSITE-CHANGEME: The next node's role desigatnion + tags: + - 'workers' +...