+++ /dev/null
-##############################################################################
-# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved. #
-# #
-# Licensed under the Apache License, Version 2.0 (the "License"); you may #
-# not use this file except in compliance with the License. #
-# #
-# You may obtain a copy of the License at #
-# http://www.apache.org/licenses/LICENSE-2.0 #
-# #
-# Unless required by applicable law or agreed to in writing, software #
-# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT #
-# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. #
-# See the License for the specific language governing permissions and #
-# limitations under the License. #
-##############################################################################
-
-# Add proxy settings if required for your environment
-# export http_proxy=http://your.proxy.com:8080/
-# export https_proxy=http://your.proxy.com:8080/
-#
-
-# host name for server
-SRV_NAME=aknode30
-
-# server oem - Dell or HPE (case sensitive)
-SRV_OEM=HPE
-
-# out of band interface information for server (idrac/ilo/etc)
-SRV_OOB_IP=192.168.41.130
-SRV_OOB_USR=Administrator
-SRV_OOB_PWD=Admin123
-
-# mac address of server to be used during the build - not required for Dell servers
-SRV_MAC=3c:fd:fe:aa:90:b0
-
-# name of network interface used during build when ipxe.efi is booted and when os is booted
-# ipxe numbers ports from 0-n in pci bus order.
-# the netx value will depend on how many nics are in the server
-# and which pci device number is assigned to the slot
-SRV_IPXE_INF=net4
-
-# the build interface is the nic used by the Ubuntu installed to load the OS
-SRV_BLD_INF=ens3f0
-
-# the boot device is the device name on which the OS will be loaded
-SRV_BOOT_DEVICE=sdj
-SRV_CEPH_DEVICE=sdk
-
-# ipxe script to use - based on the os version and kernel to install
-# valid options are script-hwe-16.04.4-amd64.ipxe or script-16.04.4-amd64.ipxe
-SRV_BLD_SCRIPT=script-hwe-16.04.5-amd64.ipxe
-
-# template xml file to set bios and raid configuration settings
-SRV_BIOS_TEMPLATE=hpe_dl380_g10_uefi_base.json.template
-SRV_BOOT_TEMPLATE=hpe_dl380_g10_uefi_httpboot.json.template
-SRV_HTTP_BOOT_DEV=NIC.Slot.3-1-1
-
-# tempalte to run to configure OS after first boot
-# current options are: firstboot.sh.template, firstboot-genesis.sh.tempate or firstboot-airship-iab.sh.template
-SRV_FIRSTBOOT_TEMPLATE=firstboot-genesis.sh.template
-
-# VLAN to use during build and for final network configuration
-SRV_VLAN=41
-SRV_STORAGE_VLAN=42
-SRV_CALICO_VLAN=44
-SRV_NEUTRON_VLAN=45
-SRV_PXE_INF=eno1
-
-# basic network information for dhcp config and final server network settings
-SRV_MTU=9000
-SRV_IP=192.168.2.30
-SRV_STORAGE_IP=172.31.1.30
-SRV_CALICO_IP=172.29.1.30
-SRV_NEUTRON_IP=10.0.101.30
-SRV_PXE_IP=172.30.1.30
-SRV_SUBNET=192.168.2.0
-SRV_NETMASK=255.255.255.0
-SRV_GATEWAY=192.168.2.200
-SRV_DNS="192.168.2.85 8.8.8.8 8.8.4.4"
-SRV_DOMAIN=lab.akraino.org
-SRV_DNSSEARCH=lab.akraino.org
-SRV_NTP=ntp.ubuntu.org
-
-# root password for server being built
-SRV_PWD=akraino,d
-
-# network bond information
-SRV_BOND=bond0
-SRV_SLAVE1=ens3f0
-SRV_SLAVE2=ens3f1
-
+++ /dev/null
-##############################################################################
-# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved. #
-# #
-# Licensed under the Apache License, Version 2.0 (the "License"); you may #
-# not use this file except in compliance with the License. #
-# #
-# You may obtain a copy of the License at #
-# http://www.apache.org/licenses/LICENSE-2.0 #
-# #
-# Unless required by applicable law or agreed to in writing, software #
-# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT #
-# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. #
-# See the License for the specific language governing permissions and #
-# limitations under the License. #
-##############################################################################
-
-# Add proxy settings if required for your environment
-# export http_proxy=http://your.proxy.com:8080/
-# export https_proxy=http://your.proxy.com:8080/
-#
-
-# host name for server
-SRV_NAME=aknode40
-
-# server oem - Dell or HPE (case sensitive)
-SRV_OEM=Dell
-
-# out of band interface information for server (idrac/ilo/etc)
-SRV_OOB_IP=192.168.41.40
-SRV_OOB_USR=root
-SRV_OOB_PWD=calvin
-
-# mac address of server to be used during the build - not required for Dell servers
-SRV_MAC=
-
-# name of network interface used during build when ipxe.efi is booted and when os is booted
-# ipxe numbers ports from 0-n in pci bus order.
-# the netx value will depend on how many nics are in the server
-# and which pci device number is assigned to the slot
-SRV_IPXE_INF=net4
-
-# the build interface is the nic used by the Ubuntu installed to load the OS
-SRV_BLD_INF=enp94s0f0
-
-# the boot device is the device name on which the OS will be loaded
-SRV_BOOT_DEVICE=sdg
-SRV_CEPH_DEVICE=sdh
-
-# ipxe script to use - based on the os version and kernel to install
-# valid options are script-hwe-16.04.4-amd64.ipxe or script-16.04.4-amd64.ipxe
-SRV_BLD_SCRIPT=script-hwe-16.04.5-amd64.ipxe
-
-# template xml file to set bios and raid configuration settings
-SRV_BIOS_TEMPLATE=dell_r740_g14_uefi_base.xml.template
-SRV_BOOT_TEMPLATE=dell_r740_g14_uefi_httpboot.xml.template
-SRV_HTTP_BOOT_DEV=NIC.Slot.2-1-1
-
-# tempalte to run to configure OS after first boot
-# current options are: firstboot.sh.template, firstboot-genesis.sh.tempate or firstboot-airship-iab.sh.template
-SRV_FIRSTBOOT_TEMPLATE=firstboot-genesis.sh.template
-
-# VLAN to use during build and for final network configuration
-SRV_VLAN=41
-SRV_STORAGE_VLAN=42
-SRV_CALICO_VLAN=44
-SRV_NEUTRON_VLAN=45
-SRV_PXE_INF=eno3
-
-# basic network information for dhcp config and final server network settings
-SRV_MTU=9000
-SRV_IP=192.168.2.40
-SRV_STORAGE_IP=172.31.2.40
-SRV_CALICO_IP=172.29.1.40
-SRV_NEUTRON_IP=10.0.102.40
-SRV_PXE_IP=172.30.2.40
-SRV_SUBNET=192.168.2.0
-SRV_NETMASK=255.255.255.0
-SRV_GATEWAY=192.168.2.200
-SRV_DNS="192.168.2.85 8.8.8.8 8.8.4.4"
-SRV_DOMAIN=lab.akraino.org
-SRV_DNSSEARCH=lab.akraino.org
-SRV_NTP=ntp.ubuntu.org
-
-# root password for server being built
-SRV_PWD=akraino,d
-
-# network bond information
-SRV_BOND=bond0
-SRV_SLAVE1=enp94s0f0
-SRV_SLAVE2=enp94s0f1
-
SRV_CEPH_DEVICE={{yaml.disks[1].name}}
# ipxe script to use - based on the os version and kernel to install
-# valid options are script-hwe-16.04.4-amd64.ipxe or script-16.04.4-amd64.ipxe
-SRV_BLD_SCRIPT=script-hwe-16.04.5-amd64.ipxe
+# valid options are script-hwe-16.04.6-amd64.ipxe or script-16.04.6-amd64.ipxe
+SRV_BLD_SCRIPT=script-hwe-16.04.6-amd64.ipxe
# template xml file to set bios and raid configuration settings
SRV_BIOS_TEMPLATE={{yaml.genesis.bios_template}}