--- /dev/null
+
+[master]
+10.0.0.15
--- /dev/null
+
+[master]
+master-ip
# See the License for the specific language governing permissions and
# limitations under the License.
-# Set the Password of Harbor admin account, no default value,
-# must set by users here
-HARBOR_ADMIN_PASSWORD: any_password
+# Set the regex name of the network interface for calico
+NETWORK_INTERFACE: ens.*
# Could be true or false
# true: Deploy k8s NFS Server to keep the persistence of all pods' data
# false: No need to keep the persistence of all pods' data
+ENABLE_PERSISTENCE: true
-# ENABLE_PERSISTENCE: true
-ENABLE_PERSISTENCE: false
+# ip for portals, will be set to private IP of master node default or reset it to be the public IP of master node here
+#PORTAL_IP: xxx.xxx.xxx.xxx
-# ip for portals, will be set to private IP of master node default or
-# reset it to be the public IP of master node here
-# PORTAL_IP: xxx.xxx.xxx.xxx
-PORTAL_IP: IP_master_node
+# IP of the Controller master which is used for Edge to connect
+# If you deploy Controller and Edge together in one cluster, then ther is no need to set this param
+#CONTROLLER_MASTER_IP: xxx.xxx.xxx.xxx
+
+# NIC name of master node
+# If master node is with single NIC, not need to set it here and will get the default NIC name during the run time
+# If master node is with multiple NICs, should set it here to be 2 different NICs
+# EG_NODE_EDGE_MP1: eth0
+# EG_NODE_EDGE_MM5: eth0
+
+# Email Server Config for User Mgmt
+usermgmt_mail_enabled: false
+# If usermgmt_mail_enabled is true, then the following 4 params need to be set
+# usermgmt_mail_host: xxxxx
+# usermgmt_mail_port: xxxxx
+# usermgmt_mail_sender: xxxxx
+# usermgmt_mail_authcode: xxxxx
-#
# Copyright 2021 Huawei Technologies Co., Ltd.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# See the License for the specific language governing permissions and
# limitations under the License.
-# Set the Password of Harbor admin account, no default value,
-# must set by users here
-HARBOR_ADMIN_PASSWORD: Harbor@edge
+# Set the regex name of the network interface for calico
+NETWORK_INTERFACE: ens.*
# Could be true or false
# true: Deploy k8s NFS Server to keep the persistence of all pods' data
# false: No need to keep the persistence of all pods' data
-ENABLE_PERSISTENCE: false
+ENABLE_PERSISTENCE: true
+
+# ip for portals, will be set to private IP of master node default or reset it to be the public IP of master node here
+#PORTAL_IP: xxx.xxx.xxx.xxx
-# ip for portals, will be set to private IP of master node default or
-# reset it to be the public IP of master node here
-# PORTAL_IP: xxx.xxx.xxx.xxx
+# IP of the Controller master which is used for Edge to connect
+# If you deploy Controller and Edge together in one cluster, then ther is no need to set this param
+#CONTROLLER_MASTER_IP: xxx.xxx.xxx.xxx
# NIC name of master node
-# If master node is with single NIC, not need to set it here and will get
-# the default NIC name during the run time
-# If master node is with multiple NICs, should set it here to be
-# 2 different NICs
+# If master node is with single NIC, not need to set it here and will get the default NIC name during the run time
+# If master node is with multiple NICs, should set it here to be 2 different NICs
# EG_NODE_EDGE_MP1: eth0
# EG_NODE_EDGE_MM5: eth0
-OCD_IP: 10.0.0.33
+# Email Server Config for User Mgmt
+usermgmt_mail_enabled: false
+# If usermgmt_mail_enabled is true, then the following 4 params need to be set
+# usermgmt_mail_host: xxxxx
+# usermgmt_mail_port: xxxxx
+# usermgmt_mail_sender: xxxxx
+# usermgmt_mail_authcode: xxxxx
# yamllint disable rule:line-length
cmd: ansible-playbook --inventory hosts-aio -e "ansible_user=root" eg_all_aio_install.yml >> aio_log
# yamllint disable rule:line-length
- chdir: /tmp/eg_download/deploy/ansible-all-arm-latest/install
+ chdir: /tmp/eg_download/deploy/EdgeGallery-v1.3.0-all-x86/install
when: ansible_architecture == 'aarch64'
- name: Install edgegallery
# yamllint disable rule:line-length
cmd: ansible-playbook --inventory hosts-aio -e "ansible_user=root" eg_all_aio_install.yml >> aio_log
# yamllint disable rule:line-length
- chdir: /tmp/eg_download/deploy/ansible-all-x86-latest/install
+ chdir: /tmp/eg_download/deploy/EdgeGallery-v1.3.0-all-x86/install
when: ansible_architecture == 'x86_64'
# See the License for the specific language governing permissions and
# limitations under the License.
----
-# tasks file for MUNO controller
### MUNO controller installation ###
- name: Check edgegallery tar ball present
stat:
- path: /tmp/eg_download/deploy/EdgeGallery-v1.1.1-controller-x86.tar.gz
+ path: /tmp/eg_download/deploy/EdgeGallery-v1.3.0-controller-x86.tar.gz
register: tar_var
-- name: Download 1.1 edgegallery x86 controller
+- name: Download 1.3 edgegallery x86 controller
# yamllint disable rule:line-length
- command: wget https://akraino.obs.ap-southeast-1.myhuaweicloud.com/v1.1.1/x86/EdgeGallery-v1.1.1-controller-x86.tar.gz
+ command: wget http://edgegallery-v1.3.0.obs.cn-north-4.myhuaweicloud.com/x86/EdgeGallery-v1.3.0-controller-x86.tar.gz
# yamllint disable rule:line-length
args:
chdir: /tmp/eg_download/deploy/
when: not tar_var.stat.exists
- name: Untar Edgegallery offline controller tar file
- command: tar -xvf EdgeGallery-v1.1.1-controller-x86.tar.gz
+ command: tar -xvf EdgeGallery-v1.3.0-controller-x86.tar.gz
args:
chdir: /tmp/eg_download/deploy/
when: not tar_var.stat.exists
- name: Set inventory file for muno controller
-# yamllint disable rule:line-length
- command: cp muno-config/controller/hosts-muno-controller /tmp/eg_download/deploy/EdgeGallery-v1.1.1-controller-x86/install
+ ## yamllint disable rule:line-length
+ command: cp muno-config/controller/hosts-muno-controller /tmp/eg_download/deploy/EdgeGallery-v1.3.0-controller-x86/install
# yamllint disable rule:line-length
args:
chdir: "{{playbook_dir}}"
- name: Set var.yml file for muno controller
# yamllint disable rule:line-length
- command: cp muno-config/controller/var.yml /tmp/eg_download/deploy/EdgeGallery-v1.1.1-controller-x86/install
+ command: cp muno-config/controller/var.yml /tmp/eg_download/deploy/EdgeGallery-v1.3.0-controller-x86/install
# yamllint disable rule:line-length
args:
chdir: "{{playbook_dir}}"
# yamllint disable rule:line-length
cmd: ansible-playbook --inventory hosts-muno-controller -e "ansible_user=root" eg_controller_aio_install.yml >> muno_controller_log
# yamllint disable rule:line-length
- chdir: /tmp/eg_download/deploy/EdgeGallery-v1.1.1-controller-x86/install
+ chdir: /tmp/eg_download/deploy/EdgeGallery-v1.3.0-controller-x86/install
when: ansible_architecture == 'x86_64'
# See the License for the specific language governing permissions and
# limitations under the License.
----
### MUNO edge installation ###
- name: Check edgegallery tar ball present
stat:
- path: /tmp/eg_download/deploy/EdgeGallery-v1.1.1-edge-x86.tar.gz
+ path: /tmp/eg_download/deploy/EdgeGallery-v1.3.0-edge-x86.tar.gz
register: edge_tar_var
-- name: Download 1.1 edgegallery x86 edge
-# yamllint disable rule:line-length
- command: wget https://akraino.obs.ap-southeast-1.myhuaweicloud.com/v1.1.1/x86/EdgeGallery-v1.1.1-edge-x86.tar.gz
-# yamllint disable rule:line-length
+- name: Download 1.3 edgegallery x86 edge
+ # yamllint disable rule:line-length
+ command: wget http://edgegallery-v1.3.0.obs.cn-north-4.myhuaweicloud.com/x86/EdgeGallery-v1.3.0-edge-x86.tar.gz
+ # yamllint disable rule:line-length
args:
chdir: /tmp/eg_download/deploy/
when: not edge_tar_var.stat.exists
- name: Untar Edgegallery offline edge tar file
- command: tar -xvf EdgeGallery-v1.1.1-edge-x86.tar.gz
+ command: tar -xvf EdgeGallery-v1.3.0-edge-x86.tar.gz
args:
- chdir: /tmp/eg_download/deploy/
+ chdir: /tmp/eg_download/deploy/
when: not edge_tar_var.stat.exists
- name: Set inventory file for muno edge
-# yamllint disable rule:line-length
+ # yamllint disable rule:line-length
command: scp root@{{ OCD_IP }}:"{{playbook_dir}}"/muno-config/edge/hosts-muno-edge .
-# yamllint disable rule:line-length
+ # yamllint disable rule:line-length
args:
chdir: "{{playbook_dir}}"
- name: Set var.yml file for muno edge
-# yamllint disable rule:line-length
+ # yamllint disable rule:line-length
command: scp root@{{ OCD_IP }}:"{{playbook_dir}}"/muno-config/edge/var.yml .
-# yamllint disable rule:line-length
+ # yamllint disable rule:line-length
args:
chdir: "{{playbook_dir}}"
# yamllint disable rule:line-length
cmd: ansible-playbook --inventory hosts-muno-edge -e "ansible_user=root" eg_edge_aio_install.yml >> muno_edge_log
# yamllint disable rule:line-length
- chdir: /tmp/eg_download/deploy/EdgeGallery-v1.1.1-edge-x86/install
+ chdir: /tmp/eg_download/deploy/EdgeGallery-v1.3.0-edge-x86/install
when: ansible_architecture == 'x86_64'
when: ansible_architecture == 'x86_64'
- name: Set default-var.yml to eg path
- # yamllint disable rule:line-length
+ # yamllint disable rule:line-length
command: cp default-var.yml /tmp/eg_download/deploy/EdgeGallery-v1.3.0-all-x86/install
# yamllint disable rule:line-length
args:
chdir: "{{playbook_dir}}"
when: ansible_architecture == 'x86_64'
+
+- name: Set password-var.yml to eg path
+ # yamllint disable rule:line-length
+ command: cp password-var.yml /tmp/eg_download/deploy/EdgeGallery-v1.3.0-all-x86/install
+ # yamllint disable rule:line-length
+ args:
+ chdir: "{{playbook_dir}}"
+ when: ansible_architecture == 'x86_64'