X-Git-Url: https://gerrit.akraino.org/r/gitweb?p=ta%2Fimage-provision.git;a=blobdiff_plain;f=image-provision.spec;fp=image-provision.spec;h=41cf134159352e37dbe75bdeb052fd05eec7f1ff;hp=0000000000000000000000000000000000000000;hb=c7c7275de42407b5ca24366dc3989d04a23b983c;hpb=0582eef24f9d17ffac9f5dd050ea6e61070dc019

diff --git a/image-provision.spec b/image-provision.spec
new file mode 100644
index 0000000..41cf134
--- /dev/null
+++ b/image-provision.spec
@@ -0,0 +1,93 @@
+# Copyright 2019 Nokia
+
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+Name:       image-provision
+Version:    %{_version}
+Release:    1%{?dist}
+Summary:    Contains dracut modules used for provisioning master image from a boot CD.
+License:    %{_platform_licence}
+Source0:    %{name}-%{version}.tar.gz
+Vendor:     %{_platform_vendor}
+BuildArch:  noarch
+
+BuildRequires: rsync
+Requires: cloud-init, dracut, coreutils, parted, gzip, iproute, util-linux, findutils, kmod, kbd, iscsi-initiator-utils, qemu-img-ev, gdisk, tar, wget, curl, glibc, hw-detector
+
+%description
+This RPM contains dracut modules. They are used for provisioning master image from a boot CD.
+
+%prep
+%autosetup
+
+%build
+
+%install
+mkdir -p %{buildroot}/usr/lib/dracut/modules.d/
+mkdir -p %{buildroot}/etc/
+
+rsync -av dracut/modules/00installmedia %{buildroot}/usr/lib/dracut/modules.d/
+rsync -av dracut/modules/00readfloppyconf %{buildroot}/usr/lib/dracut/modules.d/
+rsync -av dracut/modules/00readcdconf %{buildroot}/usr/lib/dracut/modules.d/
+rsync -av dracut/modules/00netconfig %{buildroot}/usr/lib/dracut/modules.d/
+rsync -av dracut/conf/dracut-provision.conf  %{buildroot}/etc/
+
+%files
+%defattr(0755,root,root)
+/etc/dracut-provision.conf
+/usr/lib/dracut/modules.d/00installmedia
+/usr/lib/dracut/modules.d/00readfloppyconf
+/usr/lib/dracut/modules.d/00readcdconf
+/usr/lib/dracut/modules.d/00netconfig
+
+%pre
+
+%post
+# Get the lateset kernel version, and prepare provisioning initrd based on it.
+KVER=`ls --sort=v /boot/vmlinuz-* |grep -v rescue| tail -n1 |awk -F '/boot/vmlinuz-' '{print $2}'`
+/usr/bin/dracut --nostrip --local --keep -f /boot/initrd-provisioning.img -M --nofscks --nomdadmconf --tmpdir /tmp --libdirs "/lib /lib64  /usr/lib /usr/lib64 /usr/local/lib /usr/local/lib64" --conf /etc/dracut-provision.conf --kver $KVER --confdir /usr/lib/dracut/dracut.conf.d/
+
+#Disable network service. This is delaying boot due to dhcp retries. Normally ifcfg is good enough for single tries.
+/bin/systemctl --no-reload disable network.service >/dev/null 2>&1 || :
+
+# Diabling cloud-init services as we don't need any metadata quiery as done by cloud-init.
+# We use cloud-init libraries to do growpart and resizefs. So  we need clould-init packages still.
+#/bin/systemctl --no-reload disable cloud-config.service >/dev/null 2>&1 || :
+#/bin/systemctl --no-reload disable cloud-final.service  >/dev/null 2>&1 || :
+#/bin/systemctl --no-reload disable cloud-init.service   >/dev/null 2>&1 || :
+#/bin/systemctl --no-reload disable cloud-init-local.service >/dev/null 2>&1 || :
+
+# This is a temporary fix, for udev net rename rules. The guest image choosen as base image, removes the below file.
+# When we build our own guest image, we can remove this fix from here.
+if [ -h /etc/udev/rules.d/80-net-name-slot.rules ];then
+  unlink /etc/udev/rules.d/80-net-name-slot.rules
+fi
+
+grep -q "net.ifnames=0" /etc/default/grub
+if [[ $? == 0 ]];then
+  sed -i 's/net.ifnames=0 //' /etc/default/grub
+  grub2-mkconfig > /etc/grub2.cfg
+fi
+
+
+echo "%{_name} has been succesfully installed"
+
+%preun
+
+%postun
+
+%clean
+rm -rf %{buildroot}
+
+# TIPS:
+# File /usr/lib/rpm/macros contains useful variables which can be used for example to define target directory for man page.