---

# Copyright 2019 Nokia

# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

#
# Linux password hardening
#

- name: "Set Password Strength Minimum Digit Characters."
  lineinfile:
    path: /etc/security/pwquality.conf
    regexp: '^[#\s]*dcredit'
    line: 'dcredit = -1'

- name: "Set Password Minimum Length."
  lineinfile:
    path: /etc/security/pwquality.conf
    regexp: '^[#\s]*minlen'
    line: 'minlen = 8'

- name: "Set Password Strength Minimum Uppercase Characters."
  lineinfile:
    path: /etc/security/pwquality.conf
    regexp: '^[#\s]*ucredit'
    line: 'ucredit = -1'

- name: "Set Password Strength Minimum Special Characters."
  lineinfile:
    path: /etc/security/pwquality.conf
    regexp: '^[#\s]*ocredit'
    line: 'ocredit = -1'

- name: "Set Password Strength Minimum Lowercase Characters."
  lineinfile:
    path: /etc/security/pwquality.conf
    regexp: '^[#\s]*lcredit'
    line: 'lcredit = -1'

- name: "Set Password Strength Minimum Different Categories."
  lineinfile:
    path: /etc/security/pwquality.conf
    regexp: '^[#\s]*minclass'
    line: 'minclass = 3'

- name: "Set Password Minimum Length in login.defs"
  lineinfile:
    path: /etc/login.defs
    regexp: '^PASS_MIN_LEN[\s]*[0-9]*$'
    line: 'PASS_MIN_LEN   8'

- name: "Set Password Minimum Age"
  lineinfile:
    path: /etc/login.defs
    regexp: '^PASS_MIN_DAYS[\s]*[0-9]*$'
    line: 'PASS_MIN_DAYS   0'

#
# YUM config
#

- name: "Ensure YUM Removes Previous Package Versions"
  lineinfile:
    path: /etc/yum.conf
    insertafter: '^[#\s]*\[main\]'
    line: 'clean_requirements_on_remove = 1'

- name: "Ensure gpgcheck Enabled for Local Packages"
  lineinfile:
    path: /etc/yum.conf
    insertafter: '^[#\s]*\[main\]'
    line: 'localpkg_gpgcheck = 1'

#
# Setting Ctrl-Alt-Del action
#

- name: "Disable Ctrl-Alt-Del Burst Action"
  lineinfile:
    path: /etc/systemd/system.conf
    insertafter: '^[#\s]*CtrlAltDelBurstAction'
    line: 'CtrlAltDelBurstAction=none'

- name: "Disable Ctrl-Alt-Del Reboot Activation"
  command: systemctl mask ctrl-alt-del.target

#
# Configure kernel modules
#

- name: "kernel module setting"
  lineinfile:
    create=yes
    dest="/etc/modprobe.d/{{item}}.conf"
    regexp="{{item}}"
    line="install {{item}} /bin/true"
  with_items:
    - bluetooth
    - dccp
    - squashfs
    - hfsplus
    - hfs
    - jffs2
    - freevxfs
    - cramfs
    - usb-storage
    - udf

#
# Disable interactive boot
#

- name:  Verify that Interactive Boot is Disabled GRUB_CMDLINE_LINUX Setting
  lineinfile:
    path: /etc/default/grub
    backrefs: yes
    regexp: '^GRUB_CMDLINE_LINUX=(.*)systemd\.confirm_spawn=(1|yes|true|on)\s*(.*)$'
    line: 'GRUB_CMDLINE_LINUX=\1\3'

- name:  Verify that Interactive Boot is Disabled GRUB_CMDLINE_LINUX_DEFAULT Setting
  lineinfile:
    path: /etc/default/grub
    backrefs: yes
    regexp: '^GRUB_CMDLINE_LINUX_DEFAULT=(.*)systemd\.confirm_spawn=(1|yes|true|on)\s*(.*)$'
    line: 'GRUB_CMDLINE_LINUX_DEFAULT=\1\3'

#
# Set file permissions
#

- name: "Set set the 600 file permissions"
  file:
    path: "{{item}}"
    state: touch
    mode: 600
  with_items:
    - /boot/grub2/grub.cfg
    - /var/log/boot.log
    - /var/log/cron

#
# Disable direct root login
#

- name: "Direct root Logins Not Allowed"
  shell: echo > /etc/securetty

- name: Change 'root' shell to nologin
  user:
    name: root
    shell: /sbin/nologin

- name: Lock 'root' password
  user:
    name: root
    password: '!!'

#
# Configure IPv6
#

- name: Disable ipv6 support if the ipv6 is not needed
  when: ansible_default_ipv6|length == 0
  sysctl:
    name: net.ipv6.conf.all.disable_ipv6
    value: 1
    state: present
    reload: yes

- name: Disable Support for udp6
  when: ansible_default_ipv6|length == 0
  lineinfile:
    path: /etc/netconfig
    state: absent
    regexp: '^udp6.*'

- name: Disable Support for tcp6
  when: ansible_default_ipv6|length == 0
  lineinfile:
    path: /etc/netconfig
    state: absent
    regexp: '^tcp6.*'

- name: Disable automatic ipv6 configuration
  when: ansible_default_ipv6|length > 0
  sysctl:
    name: "{{ item.name }}"
    value: "{{ item.value }}"
    state: present
    reload: yes
  with_items:
    - { name: 'net.ipv6.conf.all.accept_source_route', value: 0 }
    - { name: 'net.ipv6.conf.all.accept_ra', value: 0 }
    - { name: 'net.ipv6.conf.default.accept_ra', value: 0 }
    - { name: 'net.ipv6.conf.all.accept_redirects', value: 0 }
    - { name: 'net.ipv6.conf.default.accept_redirects', value: 0 }
    - { name: 'net.ipv6.conf.default.accept_source_route', value: 0 }
    - { name: 'net.ipv6.conf.all.forwarding', value: 0 }

#
# Configure kernel parameters
#

- name: Configure the kernel parameters
  sysctl:
    name: "{{ item.name }}"
    value: "{{ item.value }}"
    state: present
    reload: yes
  with_items:
    - { name: 'net.ipv4.conf.default.send_redirects', value: 0 }
    - { name: 'net.ipv4.conf.all.send_redirects', value: 0 }
    - { name: 'net.ipv4.ip_forward', value: 0 }
    - { name: 'net.ipv4.conf.all.accept_redirects', value: 0 }
    - { name: 'net.ipv4.conf.all.secure_redirects', value: 0 }
    - { name: 'net.ipv4.conf.all.log_martians', value: 1 }
    - { name: 'net.ipv4.conf.default.log_martians', value: 1 }
    - { name: 'net.ipv4.conf.default.accept_redirects', value: 0 }
    - { name: 'net.ipv4.conf.default.secure_redirects', value: 0 }
    - { name: 'net.ipv4.icmp_echo_ignore_broadcasts', value: 1 }
    - { name: 'net.ipv4.icmp_ignore_bogus_error_responses', value: 1 }
    - { name: 'net.ipv4.tcp_syncookies', value: 1 }
    - { name: 'fs.suid_dumpable', value: 0 }
    - { name: 'kernel.dmesg_restrict', value: 1 }
    - { name: 'kernel.core_uses_pid', value: 1 }
    - { name: 'kernel.randomize_va_space', value: 2 }
    - { name: 'kernel.core_pattern', value: '/var/core/core'}

#
# Configure core dump
#

- name: "Disable core dump for all user"
  lineinfile:
    path: /etc/security/limits.conf
    insertbefore: '^[a-z].*'
    line: '*               hard    core            0'

- name: "Configure systemd not to store core dumps"
  lineinfile:
    path: /etc/systemd/coredump.conf
    insertafter: '^\[Coredump\]'
    line: 'Storage=none'

#
# Configure syslog
#
- name: "Stop rsyslog Service"
  shell: systemctl stop rsyslog.service

- name: "Disable rsyslog Service"
  shell: systemctl disable rsyslog.service

- name: "Ensure the /var/log/boot.log Rotated by logrotate"
  lineinfile:
    path: /etc/logrotate.d/syslog
    insertbefore: 'cron$'
    line: /var/log/boot.log

- name: "Set the umasks by profile file"
  lineinfile:
    path: /etc/profile
    regexp: '{{ item.old }}'
    line: '{{ item.new }}'
  with_items:
    - { old: 'umask 002', new: umask 027 }
    - { old: 'umask 022', new: umask 077 }

#
# Keystone config
#

- name: Set the max_request_body_size in the keystone.conf
  lineinfile:
    path: /etc/keystone/keystone.conf
    insertafter: 'DEFAULT'
    line: "# enforced by optional sizelimit middleware (keystone.middleware:RequestBodySizeLimiter)\nmax_request_body_size = 114688\n"

- name: Set the insecure_debug in the keystone.conf
  lineinfile:
    path: /etc/keystone/keystone.conf
    insertafter: 'DEFAULT'
    line: "# If set to true, then the server will return information in HTTP responses\n# that may allow an unauthenticated or authenticated user to get more\n# information than normal, such as additional details about why authentication\n# failed. This may be useful for debugging but is insecure. (boolean value)\ninsecure_debug = false\n"

#
#Setting bootloader password
#
- name: set host os variable
  when: host_os is defined
  set_fact:
    grub2_pass: "{{  host_os.grub2_password | default('Empty')  }}"

- name: protect grub with root password
  when: grub2_pass is defined and grub2_pass != 'Empty'
  blockinfile:
    dest: /etc/grub.d/40_custom
    state: present
    insertafter: 'EOF'
    content: |
      # define superusers
      set superusers="root"
      #define users
      password_pbkdf2 root "{{ grub2_pass }}"

- name: generate grub config
  when: grub2_pass is defined and grub2_pass != 'Empty'
  command: /usr/sbin/grub2-mkconfig -o /boot/grub2/grub.cfg

#
#Setting the noexec option to the /dev/shm mount dir
#

- name: get back device associated to mountpoint
  shell: mount | grep ' /dev/shm ' |cut -d ' ' -f 1
  register: device_name
  check_mode: no

- name: get back device previous mount option
  shell: mount | grep ' /dev/shm ' | sed -re 's:.*\((.*)\):\1:'
  register: device_cur_mountoption
  check_mode: no

- name: get back device fstype
  shell: mount | grep ' /dev/shm ' | cut -d ' ' -f 5
  register: device_fstype
  check_mode: no

- name: Ensure permission noexec are set on /dev/shm
  mount:
    path: "/dev/shm"
    src: "{{device_name.stdout}}"
    opts: "{{device_cur_mountoption.stdout}},noexec"
    state: "mounted"
    fstype: "{{device_fstype.stdout}}"

#
# Setting file permissions
#

#- name: "Remove the other user write permission from the system directorys"
#  command: find / -xdev \( -perm -0002 -a ! -perm -1000 \) -type d -exec chmod o-w {} \;
#
#- name: "Remove the other user write permission from the system files"
#  command: find / -xdev -perm -0002 -type f -exec chmod o-w {} \;
#
#- name: "Modified the unauthorized SUID/SGID system executables"
#  command: sudo chmod -s $(sudo find / -xdev \( -perm -4000 -o -perm -2000 \) -type f | grep -v sudo)