X-Git-Url: https://gerrit.akraino.org/r/gitweb?p=ta%2Fstart-menu.git;a=blobdiff_plain;f=src%2Fstart_menu.sh;fp=src%2Fstart_menu.sh;h=3e17e818906cda8fd46a89d0fe2944b2998368e6;hp=0000000000000000000000000000000000000000;hb=b375099e93d04ad442dc74dedba26facbaf48c62;hpb=781906b4537f9a248c7f7f4ad4fdf7abc4f629db

diff --git a/src/start_menu.sh b/src/start_menu.sh
new file mode 100755
index 0000000..3e17e81
--- /dev/null
+++ b/src/start_menu.sh
@@ -0,0 +1,371 @@
+#!/bin/bash
+
+# Copyright 2019 Nokia
+
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+DEFAULT_WIDTH=120
+DEFAULT_HEIGHT=40
+
+USER_CONFIG_FILE=/etc/userconfig/user_config.yaml
+LOG_DIR=/var/log/start-menu
+RC_FILE=/tmp/start_menu.rc
+DEBUG_FLAG=/opt/start-menu/config/__debug
+
+function ask_for_device()
+{
+  device=$1
+  shift 1
+
+  declare -a devices
+  devices=($(ls /sys/class/net))
+  radiolist=""
+  if [ -z "$device" ]; then
+    device=${devices[0]}
+  fi
+  for dev in ${devices[*]}; do
+    if [ "$dev" != "lo" ]; then
+      mac=$(cat /sys/class/net/$dev/address)
+      if [ "$dev" == "$device" ]; then
+        status="on"
+      else
+        status="off"
+      fi
+      radiolist="${radiolist}$dev $mac $status "
+    fi
+  done
+  device=$(dialog --clear --stdout --no-cancel --radiolist "Select network device:" 0 $DEFAULT_WIDTH 10 $radiolist)
+  RC=$?
+  if [ "$RC" -eq 0 ]; then
+    echo $device
+  fi
+
+  return $RC
+}
+
+function ask_for_ip()
+{
+  device=$1
+  address=$2
+
+  rc=1
+  while [ "$rc" -ne 0 ]; do
+    address=$(dialog --clear --stdout --inputbox "Enter IP address for $device (CIDR format):" 0 $DEFAULT_WIDTH $address)
+    if [ "$?" -ne 0 ]; then
+      return 1
+    fi
+
+    if [ -z "$address" ]; then
+      dialog --clear --stdout --msgbox "No address entered" 0 0
+    else
+      # check if valid address
+      err=$(ipcalc -c $address 2>&1)
+      rc=$?
+      if [ "$rc" -ne 0 ]; then
+        dialog --clear --stdout --msgbox "$err" 0 0
+      else
+        # check if network address (prefix given)
+        if [[ $address != */* ]]; then
+          dialog --clear --stdout --msgbox "No CIDR prefix given" 0 0
+        fi
+      fi
+    fi
+  done
+
+  echo $address
+
+  return 0
+}
+
+function ask_for_gateway()
+{
+  device=$1
+  gateway=$2
+
+  rc=1
+  while [ "$rc" -ne 0 ]; do
+    gateway=$(dialog --clear --stdout --inputbox "Enter gateway address for $device:" 0 $DEFAULT_WIDTH $gateway)
+    if [ "$?" -ne 0 ]; then
+      return 1
+    fi
+
+    if [ -z "$gateway" ]; then
+      dialog --clear --stdout --msgbox "No address entered" 0 0
+    else
+      err=$(ipcalc -c $gateway 2>&1)
+      rc=$?
+      if [ "$rc" -ne 0 ]; then
+        dialog --clear --stdout --msgbox "$err" 0 0
+      fi
+    fi
+  done
+
+  echo $gateway
+
+  return 0
+}
+
+function ask_for_vlan()
+{
+  device=$1
+  vlanid=$2
+
+  rc=255
+  while [ "$rc" -eq 255 ]; do
+    dialog --clear --stdout --yesno "Set VLAN for $device?" 0 0
+    rc=$?
+    if [ "$rc" -eq 0 ]; then
+      id_rc=1
+      while [ "$id_rc" -ne 0 ]; do
+        vlanid=$(dialog --clear --stdout --inputbox "Enter VLAN ID:" 0 $DEFAULT_WIDTH $vlanid)
+        id_rc=$?
+        if [ "$id_rc" -eq 255 ]; then
+          return 1
+        fi
+      done
+    fi
+  done
+
+  echo $vlanid
+}
+
+function wait_for_gateway()
+{
+  GATEWAY=$1
+  for i in {1..180}; do
+    echo "$(date)"
+    if [[ $GATEWAY = *:* ]]; then
+        ping -6 -w 1 -c 1 $GATEWAY
+    else
+        ping -w 1 -c 1 $GATEWAY
+    fi
+    if [ "$?" -eq 0 ]; then
+      echo -e "\nping to network gateway OK.\n"
+      return 0
+    else
+      sleep 1
+    fi
+  done
+
+  echo -e "\nping to network gateway failed."
+
+  if [ "$vlanid" != "" ] ; then
+    ip link delete vlan$vlanid
+    rm -f /etc/sysconfig/network-scripts/*vlan$vlanid*
+  else
+    ip a delete $address dev $device
+    rm -f /etc/sysconfig/network-scripts/*$device*
+  fi
+  ip link set $device down
+  dialog --colors --stdout --clear --cr-wrap --title "ERROR" \
+         --msgbox '\n\Z1 Can not ping gateway! \n Shut down link!' 8 29
+}
+
+function run_external_network_create_command()
+{
+  local if_status
+  local max_retries
+  local i
+
+  echo -e "Creating external network."
+  echo -e " Device : $device"
+  echo -e "Address : $address"
+  echo -e "Gateway : $gateway"
+  [ -z "$vlanid" ] || echo -e " VlanId : $vlanid"
+
+  mkdir -p /etc/os-net-config/
+  if [[ $gateway = *:* ]]; then
+    defaultroute=::/0
+  else
+    defaultroute=0.0.0.0/0
+  fi
+  if [ "$vlanid" != "" ]; then
+    sed  "s|PHYDEV|${device}|g;s|VLANID|${vlanid}|g;s|IPADDR|${address}|g;s|DEFAULTROUTE|${defaultroute}|g;s|GATEWAY|${gateway}|g" os_net_config_vlan_template.yml > /etc/os-net-config/config.yaml
+  else
+    sed  "s|PHYDEV|${device}|g;s|IPADDR|${address}|g;s|DEFAULTROUTE|${defaultroute}|g;s|GATEWAY|${gateway}|g" os_net_config_template.yml > /etc/os-net-config/config.yaml
+  fi
+
+  /bin/os-net-config
+  rm -rf /etc/os-net-config/config.yaml
+
+  max_retries=180
+  i=0
+  while [ $i -lt $max_retries ]; do
+    echo "Waiting for interface ${device} to come up..."
+    if_status="$(cat /sys/class/net/${device}/operstate)"
+    [ "$if_status" = "up" ] && break
+    sleep 1;
+    i=$((i+1))
+  done
+  echo "Link status of interface $device : $if_status"
+  [ "$if_status" != "up" ] && \
+    dialog --colors --stdout --clear --cr-wrap --title "ERROR" --msgbox '\n\Z1 Link does not come up!' 8 29
+}
+
+function set_external_network()
+{
+  device=$1
+  address=$2
+  gateway=$3
+  vlanid=$4
+  shift 4
+
+  device=$(ask_for_device "$device")
+  if [ "$?" -ne 0 ]; then
+    return 1
+  fi
+
+  address=$(ask_for_ip "$device" "$address")
+  if [ "$?" -ne 0 ]; then
+    return 1
+  fi
+
+  addr_no_mask=$(awk -F\/ '{print $1}' <<< "$address")
+
+  gateway=$(ask_for_gateway "$device" "$gateway")
+  if [ "$?" -ne 0 ]; then
+    return 1
+  fi
+
+  vlanid=$(ask_for_vlan "$device" "$vlanid")
+  if [ "$?" -ne 0 ]; then
+    return 1
+  fi
+
+  # echo is an ugly hack to workaround dialog bug (ok button loses two first lines of output)
+  (echo -e -n "\n\n"; run_external_network_create_command 2>&1) | tee $LOG_DIR/external_net_create.log | dialog --clear --stdout --progressbox "Setting up external network:" $DEFAULT_HEIGHT $DEFAULT_WIDTH
+
+  # echo is an ugly hack to workaround dialog bug (ok button loses two first lines of output)
+  
+  (echo -e -n "\n\n"; wait_for_gateway $gateway 2>&1) | tee $LOG_DIR/wait_for_gateway.log | sed -ru "s/.{$[DEFAULT_WIDTH-4]}/&\n   /g" | dialog --clear --stdout --programbox "Verify ping to gateway:" $DEFAULT_HEIGHT $DEFAULT_WIDTH
+
+}
+
+
+function installation_start()
+{
+  local config_file
+  config_file=${1}
+  local mode
+  mode=${2}
+  if validate_user_config ${config_file}; then
+    pushd /opt/cmframework/scripts/
+    if ./bootstrap.sh ${config_file} ${mode}; then
+      echo -e "################################################################################"
+      echo -e "#########################  All Done!!  ########################################"
+      echo -e "################################################################################"
+      return 0
+    else
+      echo -e "Installation failed!!!"
+    fi
+  else
+    echo -e "Validation failed!!!"
+    return 1
+  fi
+}
+
+function start_install()
+{
+  local config_file
+  config_file=${1}
+
+  (echo -e -n "\n\n";installation_start ${config_file} --install 2>&1) | tee $LOG_DIR/start_install.log
+}
+
+function validate_user_config()
+{
+  local config_file
+  config_file=${1}
+  if [ -e ${config_file} ]; then
+    return 0
+  else
+    return 1
+  fi
+}
+
+function main_menu()
+{
+  echo -e "Starting main menu"
+  selection="0"
+  while [ "$selection" != "X" ]; do
+    rc=255
+    while [ "$rc" -ne 0 ]; do
+      rm -f /tmp/dialog.out
+      selection=$(dialog --clear --stdout --no-cancel --menu "Installation" 0 0 10 \
+                                        0 "Set external network" \
+                                        1 "Start installation")
+      rc=$?
+    done
+    case $selection in
+      0)
+        set_external_network
+        ;;
+      1)
+        if start_install ${USER_CONFIG_FILE}; then
+          echo "0" > $RC_FILE
+          exit 0
+        else
+          /usr/bin/bash
+        fi
+        ;;
+      *)
+        ;;
+    esac
+  done
+}
+
+function create_config_user()
+{
+  mkdir -p /etc/userconfig/
+  userconfig_passwd=$(python -c "import crypt, getpass, pwd; print crypt.crypt('userconfig')")
+  useradd --home-dir=/etc/userconfig/ --password=$userconfig_passwd userconfig
+  chown userconfig:userconfig /etc/userconfig
+}
+
+function delete_config_user()
+{
+  pkill -u userconfig
+  userdel userconfig
+}
+
+while [[ "$(systemctl is-system-running)" == "starting" ]]; do
+  echo "start-menu waiting for systemctl to finish startup..."
+  sleep 10
+done
+
+clear
+
+# disable kernel logs to console
+echo 3 > /proc/sysrq-trigger
+ 
+mkdir -p $LOG_DIR
+
+if [ -e $DEBUG_FLAG ]; then
+  logger "start-menu in debug mode"
+  /usr/bin/bash
+fi
+
+if [ -e ${USER_CONFIG_FILE} ]; then
+  if start_install ${USER_CONFIG_FILE}; then
+    echo "Install succeeded"
+    echo "0" > $RC_FILE
+    exit 0
+  else
+    echo "Install failed, check logs ($LOG_DIR)"
+    echo "1" > $RC_FILE
+    /usr/bin/bash
+    exit 1
+  fi
+else
+  main_menu
+fi