-\r
-#------------------------Pre-Modification----------------------------------------------------\r
-mkdir RIC\r
-cd RIC\r
-\r
-#---------Clone the repo and perform the steps customize the deployment and values files------\r
-git clone https://gerrit.o-ran-sc.org/r/it/dep\r
-#run the localize script\r
-cd /home/cloudadmin/RIC/dep\r
-git checkout 189c974169043e89fa216df5ca638fb550e041e4\r
-cat <<EOF >runric_env.sh\r
-\r
-#!/bin/bash\r
-################################################################################\r
-# Copyright (c) 2019 AT&T Intellectual Property. #\r
-# Copyright (c) 2019 Nokia. #\r
-# #\r
-# Licensed under the Apache License, Version 2.0 (the "License"); #\r
-# you may not use this file except in compliance with the License. #\r
-# You may obtain a copy of the License at #\r
-# #\r
-# http://www.apache.org/licenses/LICENSE-2.0 #\r
-# #\r
-# Unless required by applicable law or agreed to in writing, software #\r
-# distributed under the License is distributed on an "AS IS" BASIS, #\r
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. #\r
-# See the License for the specific language governing permissions and #\r
-# limitations under the License. #\r
-################################################################################\r
-\r
-\r
-# customize the following repo info to local infrastructure\r
-export __RICENV_SET__='1'\r
-export __RUNRICENV_GERRIT_HOST__='gerrit-o-ran-sc.org'\r
-export __RUNRICENV_GERRIT_IP__='34.215.66.175'_\r
-\r
-export __RUNRICENV_DOCKER_HOST__='rancodev'\r
-export __RUNRICENV_DOCKER_IP__='127.0.0.1'\r
-export __RUNRICENV_DOCKER_PORT__='5555'\r
-export __RUNRICENV_DOCKER_USER__='docker'\r
-export __RUNRICENV_DOCKER_PASS__='docker'\r
-\r
-export __RUNRICENV_HELMREPO_HOST__='chart-repo.kube-system.svc.rec.io'\r
-export __RUNRICENV_HELMREPO_PORT__='8088/charts'\r
-export __RUNRICENV_HELMREPO_IP__='127.0.0.1'\r
-export __RUNRICENV_HELMREPO_USER__='helm'\r
-export __RUNRICENV_HELMREPO_PASS__='helm'\r
-EOF\r
-\r
-source runric_env.sh\r
-./localize.sh\r
-\r
-cd generated/ricplt\r
-deployment_files="$(find . -name deployment.yaml)"\r
-for file in $deployment_files; do\r
- sed -i '/restartPolicy/d' "$file"\r
-done\r
-\r
-#------------------Delete the nodeport and privileges lines----------------------------------------\r
-sed -ri 's/^(\s*)(type\s*:\s*NodePort\s*$)/\1type: ClusterIP/' appmgr/charts/appmgr/values.yaml\r
-sed -ri 's/^(\s*)(type\s*:\s*NodePort\s*$)/\1type: ClusterIP/' e2mgr/charts/e2mgr/values.yaml\r
-deployment_files="$(find . -name deployment.yaml)"\r
-for file in $deployment_files; do\r
- sed -i '/privileged: true/d' "$file"\r
-done\r
-\r
-#------------------Edit the appmgr file including the path of the ca certificate-------------------\r
-cp /etc/openssl/ca.pem preric/resources/helmrepo.crt\r
-sed -i '/hostAliases:/,/system.svc.rec.io"/d' appmgr/charts/appmgr/templates/deployment.yaml\r
-\r
-#-----------------Update tiller container name-----------------------------------------------------\r
-sed -ri 's/^(\s*)("tiller-service"\s*:\s*"tiller-deploy"\s*$)/\1"tiller-service": "tiller"/' appmgr/charts/appmgr/values.yaml\r
-\r
-#-----------------Change the repo location to rec.io----------------------------------------------\r
-values_files="$(find . -name values.yaml)"\r
-for file in $values_files; do\r
- sed -i 's,rancodev:5555,registry.kube-system.svc.rec.io:5555/ric,g' "$file"\r
-done\r
-\r
-#-----------------Change the repo location to rec.io---------------------------------------------\r
-requirements_files="$(find . -name requirements.yaml)"\r
-for file in $requirements_files; do\r
- sed -i 's,local,localric,g' "$file"\r
-done\r
-\r
-sed -i 's,rancodev:5555,rancodev,g' ./prepull.sh\r
-sed -i 's/docker logout/#/' ./prepull.sh\r
-sed -i 's/docker login/#/' ./prepull.sh\r
-\r
-#!/bin/bash\r
-#-----------------Installation--------------------------------------------------------------------\r
-#--------------Reloading docker images-----------------------------------------------------------\r
-echo "docker" | sh ./prepull.sh\r
-\r
-#retag scripts\r
-for i in \\r
-"xapp-manager:latest" \\r
-"e2mgr:1.0.0" \\r
-"e2:1.0.0" \\r
-"rtmgr:0.0.2" \\r
-"redis-standalone:latest"\r
-do\r
-echo $i\r
-docker tag rancodev/${i} registry.kube-system.svc.rec.io:5555/ric/${i}\r
-docker push registry.kube-system.svc.rec.io:5555/ric/${i}\r
-done\r
-\r
-#-------------create ricplatform namespace------------------------------------------------------\r
-kubectl create namespace ricplatform\r
-\r
-#create ricplatform danmnet\r
-cat <<! | kubectl apply -f -\r
-apiVersion: danm.k8s.io/v1\r
-kind: DanmNet\r
-metadata:\r
- name: default\r
- namespace: ricplatform\r
-spec:\r
- NetworkID: flannel\r
- NetworkType: flannel\r
-!\r
-\r
-#------------run ric_install script-----------------------------------------------------------\r
-sed -i 's,http://127.0.0.1:8879,http://127.0.0.1:8879/charts,g' "ric_install.sh"\r
-sed -i 's,local,localric,g' "ric_install.sh"\r
-\r
-bash -x ./ric_install.sh\r
-#-------------checking the output-------------------------------------------------------------\r
-command="$(kubectl get po --no-headers --namespace=ricplatform --field-selector status.phase!=Running 2> /dev/null)"\r
-if [[ $command != "" ]]; then\r
- exit 1\r
-fi\r
+#!/bin/bash
+set -xe
+#------------------------Pre-Modification----------------------------------------------------
+mkdir RIC
+cd RIC
+
+#---------Clone the repo and perform the steps customize the deployment and values files------
+git clone https://gerrit.o-ran-sc.org/r/it/dep
+#run the localize script
+cd /home/cloudadmin/RIC/dep
+git checkout 189c974169043e89fa216df5ca638fb550e041e4
+cat <<EOF >runric_env.sh
+
+#!/bin/bash
+################################################################################
+# Copyright (c) 2019 AT&T Intellectual Property. #
+# Copyright (c) 2019 Nokia. #
+# #
+# Licensed under the Apache License, Version 2.0 (the "License"); #
+# you may not use this file except in compliance with the License. #
+# You may obtain a copy of the License at #
+# #
+# http://www.apache.org/licenses/LICENSE-2.0 #
+# #
+# Unless required by applicable law or agreed to in writing, software #
+# distributed under the License is distributed on an "AS IS" BASIS, #
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. #
+# See the License for the specific language governing permissions and #
+# limitations under the License. #
+################################################################################
+
+
+# customize the following repo info to local infrastructure
+export __RICENV_SET__='1'
+export __RUNRICENV_GERRIT_HOST__='gerrit-o-ran-sc.org'
+export __RUNRICENV_GERRIT_IP__='34.215.66.175'_
+
+export __RUNRICENV_DOCKER_HOST__='rancodev'
+export __RUNRICENV_DOCKER_IP__='127.0.0.1'
+export __RUNRICENV_DOCKER_PORT__='5555'
+export __RUNRICENV_DOCKER_USER__='docker'
+export __RUNRICENV_DOCKER_PASS__='docker'
+
+export __RUNRICENV_HELMREPO_HOST__='chart-repo.kube-system.svc.rec.io'
+export __RUNRICENV_HELMREPO_PORT__='8088/charts'
+export __RUNRICENV_HELMREPO_IP__='127.0.0.1'
+export __RUNRICENV_HELMREPO_USER__='helm'
+export __RUNRICENV_HELMREPO_PASS__='helm'
+EOF
+
+source runric_env.sh
+./localize.sh
+
+cd generated/ricplt
+deployment_files="$(find . -name deployment.yaml)"
+for file in $deployment_files; do
+ sed -i '/restartPolicy/d' "$file"
+done
+
+#------------------Delete the nodeport and privileges lines----------------------------------------
+sed -ri 's/^(\s*)(type\s*:\s*NodePort\s*$)/\1type: ClusterIP/' appmgr/charts/appmgr/values.yaml
+sed -ri 's/^(\s*)(type\s*:\s*NodePort\s*$)/\1type: ClusterIP/' e2mgr/charts/e2mgr/values.yaml
+deployment_files="$(find . -name deployment.yaml)"
+for file in $deployment_files; do
+ sed -i '/privileged: true/d' "$file"
+done
+
+#------------------Edit the appmgr file including the path of the ca certificate-------------------
+cp /etc/openssl/ca.pem preric/resources/helmrepo.crt
+sed -i '/hostAliases:/,/system.svc.rec.io"/d' appmgr/charts/appmgr/templates/deployment.yaml
+
+#-----------------Update tiller container name-----------------------------------------------------
+sed -ri 's/^(\s*)("tiller-service"\s*:\s*"tiller-deploy"\s*$)/\1"tiller-service": "tiller"/' appmgr/charts/appmgr/values.yaml
+
+#-----------------Change the repo location to rec.io----------------------------------------------
+values_files="$(find . -name values.yaml)"
+for file in $values_files; do
+ sed -i 's,rancodev:5555,registry.kube-system.svc.rec.io:5555/ric,g' "$file"
+done
+
+#-----------------Change the repo location to rec.io---------------------------------------------
+requirements_files="$(find . -name requirements.yaml)"
+for file in $requirements_files; do
+ sed -i 's,local,localric,g' "$file"
+done
+
+sed -i 's,rancodev:5555,rancodev,g' ./prepull.sh
+sed -i 's/docker logout/#/' ./prepull.sh
+sed -i 's/docker login/#/' ./prepull.sh
+
+#!/bin/bash
+#-----------------Installation--------------------------------------------------------------------
+#--------------Reloading docker images-----------------------------------------------------------
+echo "docker" | sh ./prepull.sh
+
+#retag scripts
+for i in \
+"xapp-manager:latest" \
+"e2mgr:1.0.0" \
+"e2:1.0.0" \
+"rtmgr:0.0.2" \
+"redis-standalone:latest"
+do
+echo $i
+docker tag rancodev/${i} registry.kube-system.svc.rec.io:5555/ric/${i}
+docker push registry.kube-system.svc.rec.io:5555/ric/${i}
+done
+
+#-------------create ricplatform namespace------------------------------------------------------
+kubectl create namespace ricplatform
+
+#create ricplatform danmnet
+cat <<! | kubectl apply -f -
+apiVersion: danm.k8s.io/v1
+kind: DanmNet
+metadata:
+ name: default
+ namespace: ricplatform
+spec:
+ NetworkID: flannel
+ NetworkType: flannel
+!
+
+#------------run ric_install script-----------------------------------------------------------
+sed -i 's,http://127.0.0.1:8879,http://127.0.0.1:8879/charts,g' "ric_install.sh"
+sed -i 's,local,localric,g' "ric_install.sh"
+
+bash -x ./ric_install.sh
+#--------------kill helm---------------------------------------------------------------------
+pkill helm
+#-------------checking the output-------------------------------------------------------------
+for i in `seq 1 10`
+do
+command="$(kubectl get po --no-headers --namespace=ricplatform --field-selector status.phase!=Running 2> /dev/null)"
+if [[ $command != "" ]]; then
+ sleep 30
+else
+ exit 0
+fi
+done
+exit 1
+
+
+
+
Code Review / rec.git / blobdiff